bone Plates - Archoverseas https://archoverseas.com My WordPress Blog Wed, 26 Feb 2025 08:03:39 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://archoverseas.com/wp-content/uploads/2024/11/cropped-Untitled-design-32x32.png bone Plates - Archoverseas https://archoverseas.com 32 32 Locking Plate Pediatric Hip 3.5 & 5.0mm https://archoverseas.com/product/locking-plate-pediatric-hip-3-5-5-0mm-8/?utm_source=rss&utm_medium=rss&utm_campaign=locking-plate-pediatric-hip-3-5-5-0mm-8 Wed, 26 Feb 2025 08:03:00 +0000 https://archoverseas.com/?post_type=product&p=19030 Locking Plate Pediatric Hip 3.5mm Ref. No. Ti Ref. No. SS Degree Length LCP6673100 LCP6673110 LCP6673120 LCP6673150 BP-100-75 BP-110-75 BP-120-75 BP-150-60 100° 110° 120° 150° 75mm 75mm 75mm 60mm Locking Plate Pediatric Hip 5.0mm Ref. No. Ti Ref. No. SS Degree Length LCP6674100 LCP6674110 LCP6674120 LCP6674150 BP-100-90 BP-110-90 BP-120-95 BP-150-75 100° 110° 120° 150° 90mm […]

The post Locking Plate Pediatric Hip 3.5 & 5.0mm first appeared on Archoverseas.

]]> Locking Plate Pediatric Hip 3.5mm Ref. No. Ti Ref. No. SS Degree Length LCP6673100

LCP6673110

LCP6673120

LCP6673150 BP-100-75

BP-110-75

BP-120-75

BP-150-60 100°

110°

120°

150° 75mm

75mm

75mm

60mm Locking Plate Pediatric Hip 5.0mm Ref. No. Ti Ref. No. SS Degree Length LCP6674100

LCP6674110

LCP6674120

LCP6674150 BP-100-90

BP-110-90

BP-120-95

BP-150-75 100°

110°

120°

150° 90mm

90mm

95mm

75mm

3.5 & 5.0 mm Locking Plate Pediatric Hip Specification

3.5 & 5.0 mm Locking Plate Pediatric Hip cover treatment options for stable fixation of varus and valgus as well as rotation osteotomies and fracture treatment of the proximal femur. 3.5 & 5.0 mm Locking Plate Pediatric Hip have a universal design for the left and right femur. Plate has three neck screws in the proximal part and combi-holes for locking or cortical screws in the distal part. Pediatric Hip Plates have the following main characteristics ensuring excellent fixation in the bone:

  • Plates available holes are 3 hole in 100°, 3 hole in 110°, 4 hole in 120°, 3, 5, 7 hole in 130° and 3 hole in 150°.
  • Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
  • The shaft holes accept 3.5 & 5.0 mm locking screws in the threaded portion or 5 mm cortical screws or 5 mm Locking cancellous screws in the compression portion. Distal locking holes in plate head accept 5 mm locking screws or 5 mm Locking cancellous screws.
  • 3.5 & 5.0 mm Locking Plate Pediatric Hip allow implant placement to address the individual fracture pattern.
  • Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
  • Choice of different lengths of plate eliminates the need to cut plates.
  • Pre-contoured plate to match anatomical shape.
  • Available in both Titanium and Stainless steel.
  • locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.
  • A complete Instruments Set is available for 3.5 & 5.0 mm Locking Plate Pediatric Hip. General Instruments are available for this plate such as Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve etc.
  • Angular stability – Reduces the risk of primary and secondary loss of correction. Due to the angular stability, a hip spica is no longer necessary in the majority of older cases.
  • Easy and safe surgical technique – Initial plate positioning with Kirschner wires rather than using a chisel allows easy adjustment without bony damage.
  • Medialization – For 3.5 & 5.0 mm Locking Plate Pediatric Hip there is the possibility of additional medialization that means that just one off-set is required for each plate size.

3.5 & 5.0 mm Locking Plate Pediatric Hip Uses

3.5 & 5.0 mm Locking Plate Pediatric Hip are indicated for fixation of fractures (including pathologic and impending pathologic fractures) and osteotomies of the femur in infants, children, adolescents and small statured adults.

Specific indications for plates include:

  • Varus, valgus, rotational and/or shortening osteotomies.
  • Femoral neck and/or pertrochanteric fractures.
  • Proximal metaphyseal fractures.
  • Diaphyseal fractures.
  • Pathologic fractures.
  • Prophylactic use for impending pathologic fractures.

Advantages of using locking plate for 3.5 & 5.0 mm Locking Pediatric Hip Plates

  • 3.5 & 5.0 mm Locking Pediatric Hip Plates is a locking plate so it does not have to precisely contact the underlying bone in all areas. When screws are tightened, they “lock” to the threaded screw holes of the plate, stabilizing the segments without pulling the bone to the plate. Locking screws make it impossible for screw insertion to alter the reduction. Non locking plate/screw systems require a precise adaptation of the plate to the underlying bone. Without this close contact, tightening of the screws will pull the bone segments toward the plate, resulting in loss of reduction and possibly the occlusal relationship
  • Locking plate/screw systems do not disrupt the underlying cortical bone perfusion as much as conventional plates, which compress the plate to the cortical bone.
  • Screws are unlikely to loosen from the plate. Similarly, if a bone graft is screwed to the plate, a locking head screw will not loosen during the phase of graft incorporation and healing. The possible advantage to this property of a locking plate/screw system is decreased risk of inflammatory complications due to hardware loosening.
  • Locking plate/screw systems have been shown to provide more stable fixation than conventional non locking plate/screw systems.

Locking Screw Technology

The heads of the locking screws contain male threads while the holes in the plates contain female threads. This allows the screw head to be threaded into the 3.5 & 5.0 mm Locking Plate Pediatric Hip hole, locking the screw into the plate. This technical innovation provides the ability to create a fixed angle construct while using familiar plating techniques.

Locking Plate Technology

By using locking screws in a bone plate, a fixed-angle construct is created. In osteopenic bone or fractures with multiple fragments, secure bone purchase with conventional screws may be compromised. Locking screws do not rely on bone/plate compression to resist patient load, but function similarly to multiple small angled blade plates. In osteopenic bone or comminuted fractures, the ability to lock screws into a fixed-angle construct is imperative.

By combining locking screw holes with compression screw slots in the shaft, the plate can be used as both a locking device and a fracture compression device. If compression is desired, it must be achieved first by inserting the standard screws in the compression screw slots before inserting any locking screws.

3.5 & 5.0 mm Locking Plate Pediatric Hip Contraindications

Contraindications may be qualified or total, and need to be taken into consideration when evaluating the prognosis in each case. Alternative management techniques may need to be considered under the following conditions:

  • Acute or chronic infections, either local or systemic.
  • Local or systemic accurate or chronic inflammation.
  • Serve muscular, nervous or vascular disease endangering the affected area.
  • Defective bone structures, which would impede adequate anchoring of the implant.
  • All associated diseases which could endanger the function and success of the implant.

Warnings and Precautionary for 3.5 & 5.0 mm Locking Plate Pediatric Hip

Before using 3.5 & 5.0 mm Locking Plate Pediatric Hip, the surgeon and ancillary staff should study the safety information in these instructions, as well as any product-specific information in the product description, surgical procedures and/or brochures.

Plates are made from medical grade materials and are designed, constructed and produced with utmost care. These quality assure best working results provided they are used in the proper manner. Therefore, the following instructions for use and safety recommendations must be observed.

Improper use of Plates can lead to damage to the tissue, premature wear, destruction of the instruments and injury to the operator, patients or other persons.

It is vital for the operating surgeon to take an active role in the medical management of their patients. The surgeon should thoroughly understand all aspects of the surgical procedure and instruments including their limitations. Care in appropriate selection and proper use of surgical instruments is the responsibility of the surgeon and the surgical team. Adequate surgical training should be completed before use of this plate.

Factors which could impair the success of the operation:

  • Allergies to implanted materials.
  • Localized bone tumours.
  • Osteoporosis or osteomalacia.
  • System disease and metabolic disturbances.
  • Alcohol and drug abuse.
  • Physical activities involving excessive shocks, whereby the implant is exposed to blows and/or excessive loading.
  • Patients who are mentally unable to understand and comply with the doctor’s instructions.
  • Poor general health.

Possible Adverse Effects

The following adverse effects are the most common resulting from implantation:

  • Loosening of the 3.5 & 5.0 mm Locking Plate Pediatric Hip, which may result from cyclic loading of the fixation site and/or tissue reaction of the implant.
  • Early and late infection.
  • Further bone fracture resulting from unusual stress or weakened bone substance.
  • Temporary or chronic neural damage resulting from pressure or hematomata.
  • Wound hematomas and delayed wound healing.
  • Vascular disease including venal thrombosis, pulmonary embolism and cardiac arrest.
  • Heterotopic ossification.
  • Pain and discomfort due to presence of the Implants.
  • Mechanical failure of the implant, including bending, loosening or breakage.
  • Migration of implant resulting in injury.

Preoperative Planning for 3.5 & 5.0 mm Locking Plate Pediatric Hip

The operating planning is carried out following a thorough clinical evaluation of the patient, Also, x-rays must be taken to allow a clear indication of the bony anatomy and associated deformities. At the time of the operation, the corresponding implantation instruments in addition to a complete set of 3.5 & 5.0 mm Locking Plate Pediatric Hip must be available.

The clinician should discuss with the patient the possible risks and complications associated with the use of Implants. It is important to determine pre-operatively whether the patient is allergic to any of the implant materials. Also, the patient needs to be informed that the performance of the device cannot be guaranteed as complications can affect the life expectancy of the device.

3.5 & 5.0 mm Locking Plate Pediatric Hip Precautions

  • Confirm functionality of instruments and check for wear during reprocessing. Replace worn or damaged instruments prior to use.
  • It is recommended to use the instruments identified for this screw.
  • Handle devices with care and dispose worn bone cutting instruments in a sharps container.
  • Always irrigate and apply suction for removal of debris potentially generated during implantation or removal.

3.5 & 5.0 mm Locking Plate Pediatric Hip Warnings

  • 3.5 & 5.0 mm Locking Plate Pediatric Hip can break during use (when subjected to excessive forces). While the surgeon must make the final decision on removal of the broken part based on associated risk in doing so, we recommend that whenever possible and practical for the individual patient, the broken part should be removed. Be aware that implants are not as strong as native bone. Implants subjected to substantial loads may fail.
  • Instruments, screws and cut plates may have sharp edges or moving joints that may pinch or tear user’s glove or skin.
  • Take care to remove all fragments that are not fixated during the surgery.
  • While the surgeon must make the final decision on implant removal, we recommend that whenever possible and practical for the individual patient, fixation devices should be removed once their service as an aid to healing is accomplished. Implant removal should be followed by adequate post-operative management to avoid refracture.

3.5 & 5.0 mm Locking Plate Pediatric Hip General Adverse Events

As with all major surgical procedures, risks, side effects and adverse events can occur. While many possible reactions may occur, some of the most common include: Problems resulting from anesthesia and patient positioning (e.g. nausea, vomiting, dental injuries, neurological impairments, etc.), thrombosis, embolism, infection, nerve and/or tooth root damage or injury of other critical structures including blood vessels, excessive bleeding, damage to soft tissues incl. swelling, abnormal scar formation, functional impairment of the musculoskeletal system, pain, discomfort or abnormal sensation due to the presence of the device, allergy or hypersensitivity reactions, side effects associated with hardware prominence, loosening, bending, or breakage of the device, mal-union, non-union or delayed union which may lead to breakage of the implant, reoperation.

The post Locking Plate Pediatric Hip 3.5 & 5.0mm first appeared on Archoverseas.

]]> Locking Plate Pediatric Hip 3.5 & 5.0mm https://archoverseas.com/product/locking-plate-pediatric-hip-3-5-5-0mm-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-plate-pediatric-hip-3-5-5-0mm-4 Wed, 26 Feb 2025 07:43:50 +0000 https://archoverseas.com/?post_type=product&p=18937 Locking Plate Pediatric Hip 3.5mm Ref. No. Ti Ref. No. SS Degree Length LCP6673100 LCP6673110 LCP6673120 LCP6673150 BP-100-75 BP-110-75 BP-120-75 BP-150-60 100° 110° 120° 150° 75mm 75mm 75mm 60mm Locking Plate Pediatric Hip 5.0mm Ref. No. Ti Ref. No. SS Degree Length LCP6674100 LCP6674110 LCP6674120 LCP6674150 BP-100-90 BP-110-90 BP-120-95 BP-150-75 100° 110° 120° 150° 90mm […]

The post Locking Plate Pediatric Hip 3.5 & 5.0mm first appeared on Archoverseas.

]]> Locking Plate Pediatric Hip 3.5mm Ref. No. Ti Ref. No. SS Degree Length LCP6673100

LCP6673110

LCP6673120

LCP6673150 BP-100-75

BP-110-75

BP-120-75

BP-150-60 100°

110°

120°

150° 75mm

75mm

75mm

60mm Locking Plate Pediatric Hip 5.0mm Ref. No. Ti Ref. No. SS Degree Length LCP6674100

LCP6674110

LCP6674120

LCP6674150 BP-100-90

BP-110-90

BP-120-95

BP-150-75 100°

110°

120°

150° 90mm

90mm

95mm

75mm

3.5 & 5.0 mm Locking Plate Pediatric Hip Specification

3.5 & 5.0 mm Locking Plate Pediatric Hip cover treatment options for stable fixation of varus and valgus as well as rotation osteotomies and fracture treatment of the proximal femur. 3.5 & 5.0 mm Locking Plate Pediatric Hip have a universal design for the left and right femur. Plate has three neck screws in the proximal part and combi-holes for locking or cortical screws in the distal part. Pediatric Hip Plates have the following main characteristics ensuring excellent fixation in the bone:

  • Plates available holes are 3 hole in 100°, 3 hole in 110°, 4 hole in 120°, 3, 5, 7 hole in 130° and 3 hole in 150°.
  • Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
  • The shaft holes accept 3.5 & 5.0 mm locking screws in the threaded portion or 5 mm cortical screws or 5 mm Locking cancellous screws in the compression portion. Distal locking holes in plate head accept 5 mm locking screws or 5 mm Locking cancellous screws.
  • 3.5 & 5.0 mm Locking Plate Pediatric Hip allow implant placement to address the individual fracture pattern.
  • Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
  • Choice of different lengths of plate eliminates the need to cut plates.
  • Pre-contoured plate to match anatomical shape.
  • Available in both Titanium and Stainless steel.
  • locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.
  • A complete Instruments Set is available for 3.5 & 5.0 mm Locking Plate Pediatric Hip. General Instruments are available for this plate such as Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve etc.
  • Angular stability – Reduces the risk of primary and secondary loss of correction. Due to the angular stability, a hip spica is no longer necessary in the majority of older cases.
  • Easy and safe surgical technique – Initial plate positioning with Kirschner wires rather than using a chisel allows easy adjustment without bony damage.
  • Medialization – For 3.5 & 5.0 mm Locking Plate Pediatric Hip there is the possibility of additional medialization that means that just one off-set is required for each plate size.

3.5 & 5.0 mm Locking Plate Pediatric Hip Uses

3.5 & 5.0 mm Locking Plate Pediatric Hip are indicated for fixation of fractures (including pathologic and impending pathologic fractures) and osteotomies of the femur in infants, children, adolescents and small statured adults.

Specific indications for plates include:

  • Varus, valgus, rotational and/or shortening osteotomies.
  • Femoral neck and/or pertrochanteric fractures.
  • Proximal metaphyseal fractures.
  • Diaphyseal fractures.
  • Pathologic fractures.
  • Prophylactic use for impending pathologic fractures.

Advantages of using locking plate for 3.5 & 5.0 mm Locking Pediatric Hip Plates

  • 3.5 & 5.0 mm Locking Pediatric Hip Plates is a locking plate so it does not have to precisely contact the underlying bone in all areas. When screws are tightened, they “lock” to the threaded screw holes of the plate, stabilizing the segments without pulling the bone to the plate. Locking screws make it impossible for screw insertion to alter the reduction. Non locking plate/screw systems require a precise adaptation of the plate to the underlying bone. Without this close contact, tightening of the screws will pull the bone segments toward the plate, resulting in loss of reduction and possibly the occlusal relationship
  • Locking plate/screw systems do not disrupt the underlying cortical bone perfusion as much as conventional plates, which compress the plate to the cortical bone.
  • Screws are unlikely to loosen from the plate. Similarly, if a bone graft is screwed to the plate, a locking head screw will not loosen during the phase of graft incorporation and healing. The possible advantage to this property of a locking plate/screw system is decreased risk of inflammatory complications due to hardware loosening.
  • Locking plate/screw systems have been shown to provide more stable fixation than conventional non locking plate/screw systems.

Locking Screw Technology

The heads of the locking screws contain male threads while the holes in the plates contain female threads. This allows the screw head to be threaded into the 3.5 & 5.0 mm Locking Plate Pediatric Hip hole, locking the screw into the plate. This technical innovation provides the ability to create a fixed angle construct while using familiar plating techniques.

Locking Plate Technology

By using locking screws in a bone plate, a fixed-angle construct is created. In osteopenic bone or fractures with multiple fragments, secure bone purchase with conventional screws may be compromised. Locking screws do not rely on bone/plate compression to resist patient load, but function similarly to multiple small angled blade plates. In osteopenic bone or comminuted fractures, the ability to lock screws into a fixed-angle construct is imperative.

By combining locking screw holes with compression screw slots in the shaft, the plate can be used as both a locking device and a fracture compression device. If compression is desired, it must be achieved first by inserting the standard screws in the compression screw slots before inserting any locking screws.

3.5 & 5.0 mm Locking Plate Pediatric Hip Contraindications

Contraindications may be qualified or total, and need to be taken into consideration when evaluating the prognosis in each case. Alternative management techniques may need to be considered under the following conditions:

  • Acute or chronic infections, either local or systemic.
  • Local or systemic accurate or chronic inflammation.
  • Serve muscular, nervous or vascular disease endangering the affected area.
  • Defective bone structures, which would impede adequate anchoring of the implant.
  • All associated diseases which could endanger the function and success of the implant.

Warnings and Precautionary for 3.5 & 5.0 mm Locking Plate Pediatric Hip

Before using 3.5 & 5.0 mm Locking Plate Pediatric Hip, the surgeon and ancillary staff should study the safety information in these instructions, as well as any product-specific information in the product description, surgical procedures and/or brochures.

Plates are made from medical grade materials and are designed, constructed and produced with utmost care. These quality assure best working results provided they are used in the proper manner. Therefore, the following instructions for use and safety recommendations must be observed.

Improper use of Plates can lead to damage to the tissue, premature wear, destruction of the instruments and injury to the operator, patients or other persons.

It is vital for the operating surgeon to take an active role in the medical management of their patients. The surgeon should thoroughly understand all aspects of the surgical procedure and instruments including their limitations. Care in appropriate selection and proper use of surgical instruments is the responsibility of the surgeon and the surgical team. Adequate surgical training should be completed before use of this plate.

Factors which could impair the success of the operation:

  • Allergies to implanted materials.
  • Localized bone tumours.
  • Osteoporosis or osteomalacia.
  • System disease and metabolic disturbances.
  • Alcohol and drug abuse.
  • Physical activities involving excessive shocks, whereby the implant is exposed to blows and/or excessive loading.
  • Patients who are mentally unable to understand and comply with the doctor’s instructions.
  • Poor general health.

Possible Adverse Effects

The following adverse effects are the most common resulting from implantation:

  • Loosening of the 3.5 & 5.0 mm Locking Plate Pediatric Hip, which may result from cyclic loading of the fixation site and/or tissue reaction of the implant.
  • Early and late infection.
  • Further bone fracture resulting from unusual stress or weakened bone substance.
  • Temporary or chronic neural damage resulting from pressure or hematomata.
  • Wound hematomas and delayed wound healing.
  • Vascular disease including venal thrombosis, pulmonary embolism and cardiac arrest.
  • Heterotopic ossification.
  • Pain and discomfort due to presence of the Implants.
  • Mechanical failure of the implant, including bending, loosening or breakage.
  • Migration of implant resulting in injury.

Preoperative Planning for 3.5 & 5.0 mm Locking Plate Pediatric Hip

The operating planning is carried out following a thorough clinical evaluation of the patient, Also, x-rays must be taken to allow a clear indication of the bony anatomy and associated deformities. At the time of the operation, the corresponding implantation instruments in addition to a complete set of 3.5 & 5.0 mm Locking Plate Pediatric Hip must be available.

The clinician should discuss with the patient the possible risks and complications associated with the use of Implants. It is important to determine pre-operatively whether the patient is allergic to any of the implant materials. Also, the patient needs to be informed that the performance of the device cannot be guaranteed as complications can affect the life expectancy of the device.

3.5 & 5.0 mm Locking Plate Pediatric Hip Precautions

  • Confirm functionality of instruments and check for wear during reprocessing. Replace worn or damaged instruments prior to use.
  • It is recommended to use the instruments identified for this screw.
  • Handle devices with care and dispose worn bone cutting instruments in a sharps container.
  • Always irrigate and apply suction for removal of debris potentially generated during implantation or removal.

3.5 & 5.0 mm Locking Plate Pediatric Hip Warnings

  • 3.5 & 5.0 mm Locking Plate Pediatric Hip can break during use (when subjected to excessive forces). While the surgeon must make the final decision on removal of the broken part based on associated risk in doing so, we recommend that whenever possible and practical for the individual patient, the broken part should be removed. Be aware that implants are not as strong as native bone. Implants subjected to substantial loads may fail.
  • Instruments, screws and cut plates may have sharp edges or moving joints that may pinch or tear user’s glove or skin.
  • Take care to remove all fragments that are not fixated during the surgery.
  • While the surgeon must make the final decision on implant removal, we recommend that whenever possible and practical for the individual patient, fixation devices should be removed once their service as an aid to healing is accomplished. Implant removal should be followed by adequate post-operative management to avoid refracture.

3.5 & 5.0 mm Locking Plate Pediatric Hip General Adverse Events

As with all major surgical procedures, risks, side effects and adverse events can occur. While many possible reactions may occur, some of the most common include: Problems resulting from anesthesia and patient positioning (e.g. nausea, vomiting, dental injuries, neurological impairments, etc.), thrombosis, embolism, infection, nerve and/or tooth root damage or injury of other critical structures including blood vessels, excessive bleeding, damage to soft tissues incl. swelling, abnormal scar formation, functional impairment of the musculoskeletal system, pain, discomfort or abnormal sensation due to the presence of the device, allergy or hypersensitivity reactions, side effects associated with hardware prominence, loosening, bending, or breakage of the device, mal-union, non-union or delayed union which may lead to breakage of the implant, reoperation.

The post Locking Plate Pediatric Hip 3.5 & 5.0mm first appeared on Archoverseas.

]]> Locking Distal Dorsal Radius L-Plate 2.7mm Type-II, Right/Left https://archoverseas.com/product/locking-distal-dorsal-radius-l-plate-2-7mm-type-ii-right-left-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-distal-dorsal-radius-l-plate-2-7mm-type-ii-right-left-4 Fri, 21 Feb 2025 13:08:04 +0000 https://archoverseas.com/?post_type=product&p=18613 Ref. No. Ti Ref. No. SS Position Size Ref. No. Ti Ref. No. SS Position Size LCP558103 LCP558104 DDR-8103 DDR-8104 Right Right 3H 4H LCP558203 LCP558204 DDR-8203 DDR-8204 Left Left 3H 4H 2.7mm Locking Distal Dorsal Radius L-Plate Type-II, Right/Left Specification 2.7mm Locking Distal Dorsal Radius L-Plate Type-II, Right/Left two-plate technique offers a strong construct […]

The post Locking Distal Dorsal Radius L-Plate 2.7mm Type-II, Right/Left first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Position Size Ref. No. Ti Ref. No. SS Position Size LCP558103

LCP558104 DDR-8103

DDR-8104 Right

Right 3H

4H LCP558203

LCP558204 DDR-8203

DDR-8204 Left

Left 3H

4H

2.7mm Locking Distal Dorsal Radius L-Plate Type-II, Right/Left Specification

  • 2.7mm Locking Distal Dorsal Radius L-Plate Type-II, Right/Left two-plate technique offers a strong construct for complex distal radius fractures and avoids removal of Lister’s tubercle.
  • Straight plates are contoured to fit the radial column and have a notched tip that allows them to fit on the radial styloid, adjacent to a
    temporary K-wire fixation.
  • Locking Compression Plates (LCP) have Combi holes which allow locking screw fixation in the threaded section or compression in the non-threaded section of the hole.
  • Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
  • Low plate-and-screw profile minimizes potential for tendon and soft tissue irritation..
  • Rounded edges minimize potential for tendon adhesion.
  • Smaller plates and screws address fracture fragments individually, with less overall implant bulk.
  • Plates available holes are 3 and 4.
  • Plates available for Left and Right.
  • Plates available in Titanium.

2.7mm Locking Distal Dorsal Radius L-Plate Type-II, Right/Left uses

2.7mm Locking Distal Dorsal Radius L-Plate Type-II, Right/Left is used or fixation of complex intra and extra-articular fractures and osteotomies of the distal radius and other small bones.

The post Locking Distal Dorsal Radius L-Plate 2.7mm Type-II, Right/Left first appeared on Archoverseas.

]]> Locking Plate Distal Lateral Radius 2.7mm https://archoverseas.com/product/locking-plate-distal-lateral-radius-2-7mm-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-plate-distal-lateral-radius-2-7mm-4 Fri, 21 Feb 2025 13:08:03 +0000 https://archoverseas.com/?post_type=product&p=18610 Ref. No. Ti Ref. No. SS Size LCP556005 LCP556006 DLR-6005 DLR-6006 5H 6H 2.7mm Locking Plate Distal Lateral Radius Specification 2.7mm Locking Plate Distal Lateral Radius two-plate technique offers a strong construct for complex distal radius fractures and avoids removal of Lister’s tubercle. Straight plates are contoured to fit the radial column and have a […]

The post Locking Plate Distal Lateral Radius 2.7mm first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Size LCP556005

LCP556006 DLR-6005

DLR-6006 5H

6H

2.7mm Locking Plate Distal Lateral Radius Specification

  • 2.7mm Locking Plate Distal Lateral Radius two-plate technique offers a strong construct for complex distal radius fractures and avoids removal of Lister’s tubercle.
  • Straight plates are contoured to fit the radial column and have a notched tip that allows them to fit on the radial styloid, adjacent to a
    temporary K-wire fixation.
  • Locking Compression Plates (LCP) have Combi holes which allow locking screw fixation in the threaded section or compression in the non-threaded section of the hole.
  • Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
  • Low plate-and-screw profile minimizes potential for tendon and soft tissue irritation..
  • Rounded edges minimize potential for tendon adhesion.
  • Smaller plates and screws address fracture fragments individually, with less overall implant bulk.
  • Plates available holes are 5 and 6.
  • Plates available in Titanium.

2.7mm Locking Locking Plate Distal Lateral Radius uses

2.7mm Locking Plate Distal Lateral Radius is used or fixation of complex intra and extra-articular fractures and osteotomies of the distal radius and other small bones.

The post Locking Plate Distal Lateral Radius 2.7mm first appeared on Archoverseas.

]]> Locking Distal Dorsal Radius T-Plate 2.7mm https://archoverseas.com/product/locking-distal-dorsal-radius-t-plate-2-7mm-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-distal-dorsal-radius-t-plate-2-7mm-4 Fri, 21 Feb 2025 13:08:03 +0000 https://archoverseas.com/?post_type=product&p=18611 Ref. No. Ti Ref. No. SS Size LCP557003 LCP557004 DDR-7003 DDR-7004 3H 4H 2.7mm Locking Distal Dorsal Radius T-Plate Specification 2.7mm Locking Distal Dorsal Radius T-Plate two-plate technique offers a strong construct for complex distal radius fractures and avoids removal of Lister’s tubercle. Straight plates are contoured to fit the radial column and have a […]

The post Locking Distal Dorsal Radius T-Plate 2.7mm first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Size LCP557003

LCP557004 DDR-7003

DDR-7004 3H

4H

2.7mm Locking Distal Dorsal Radius T-Plate Specification

  • 2.7mm Locking Distal Dorsal Radius T-Plate two-plate technique offers a strong construct for complex distal radius fractures and avoids removal of Lister’s tubercle.
  • Straight plates are contoured to fit the radial column and have a notched tip that allows them to fit on the radial styloid, adjacent to a temporary K-wire fixation.
  • Locking Compression Plates (LCP) have Combi holes which allow locking screw fixation in the threaded section or compression in the non-threaded section of the hole.
  • Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
  • Low plate-and-screw profile minimizes potential for tendon and soft tissue irritation.
  • Rounded edges minimize potential for tendon adhesion.
  • Smaller plates and screws address fracture fragments individually, with less overall implant bulk.
  • Plates available holes are 3 and 4.
  • Plates available in Titanium.

2.7mm Locking Distal Dorsal Radius T-Plate uses

2.7mm Locking Distal Dorsal Radius T-Plate is used or fixation of complex intra and extra-articular fractures and osteotomies of the distal radius and other small bones.

The post Locking Distal Dorsal Radius T-Plate 2.7mm first appeared on Archoverseas.

]]> Locking Distal Dorsal Radius L-Plate 2.7mm, Right/Left https://archoverseas.com/product/locking-distal-dorsal-radius-l-plate-2-7mm-right-left-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-distal-dorsal-radius-l-plate-2-7mm-right-left-4 Fri, 21 Feb 2025 13:08:03 +0000 https://archoverseas.com/?post_type=product&p=18612 Ref. No. Ti Ref. No. SS Position Size Ref. No. Ti Ref. No. SS Position Size LCP556103 LCP556104 DDR-6103 DDR-6104 Right Right 3H 4H LCP556203 LCP556204 DDR-6203 DDR-6204 Left Left 3H 4H 2.7mm Locking Distal Dorsal Radius L-Plate , Right/Left Specification 2.7mm Locking Distal Dorsal Radius L-Plate , Right/Left two-plate technique offers a strong construct […]

The post Locking Distal Dorsal Radius L-Plate 2.7mm, Right/Left first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Position Size Ref. No. Ti Ref. No. SS Position Size LCP556103

LCP556104 DDR-6103

DDR-6104 Right

Right 3H

4H LCP556203

LCP556204 DDR-6203

DDR-6204 Left

Left 3H

4H

2.7mm Locking Distal Dorsal Radius L-Plate , Right/Left Specification

  • 2.7mm Locking Distal Dorsal Radius L-Plate , Right/Left two-plate technique offers a strong construct for complex distal radius fractures and avoids removal of Lister’s tubercle.
  • Straight plates are contoured to fit the radial column and have a notched tip that allows them to fit on the radial styloid, adjacent to a
    temporary K-wire fixation.
  • Locking Compression Plates (LCP) have Combi holes which allow locking screw fixation in the threaded section or compression in the non-threaded section of the hole.
  • Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
  • Low plate-and-screw profile minimizes potential for tendon and soft tissue irritation..
  • Rounded edges minimize potential for tendon adhesion.
  • Smaller plates and screws address fracture fragments individually, with less overall implant bulk.
  • Plates available holes are 3 and 4.
  • Plates available for Left and Right.
  • Plates available in Titanium.

2.7mm Locking Distal Dorsal Radius L-Plate , Right/Left uses

2.7mm Locking Distal Dorsal Radius L-Plate , Right/Left is used or fixation of complex intra and extra-articular fractures and osteotomies of the distal radius and other small bones.

The post Locking Distal Dorsal Radius L-Plate 2.7mm, Right/Left first appeared on Archoverseas.

]]> Locking Plate Extra-Articular Volar Distal Radius 2.4/2.7mm 5 Hole Head Type-II, Right/Left https://archoverseas.com/product/locking-plate-extra-articular-volar-distal-radius-2-4-2-7mm-5-hole-head-type-ii-right-left-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-plate-extra-articular-volar-distal-radius-2-4-2-7mm-5-hole-head-type-ii-right-left-4 Fri, 21 Feb 2025 13:08:02 +0000 https://archoverseas.com/?post_type=product&p=18608 Ref. No. Ti Ref. No. SS Position Size Ref. No. Ti Ref. No. SS Position Size LCP676503 LCP676504 LCP676505 VR-003R VR-004R VR-005R Right Right Right 3H 4H 5H LCP676603 LCP676604 LCP676605 VR-003L VR-004L VR-005L Left Left Left 3H 4H 5H 2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-II, Right/Left Specification 2.4/2.7mm Locking Plate […]

The post Locking Plate Extra-Articular Volar Distal Radius 2.4/2.7mm 5 Hole Head Type-II, Right/Left first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Position Size Ref. No. Ti Ref. No. SS Position Size LCP676503

LCP676504

LCP676505 VR-003R

VR-004R

VR-005R Right

Right

Right 3H

4H

5H LCP676603

LCP676604

LCP676605 VR-003L

VR-004L

VR-005L Left

Left

Left 3H

4H

5H

2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-II, Right/Left Specification

  • 2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-II, Right/Left is precontoured with a complex bend designed to fit the volar surface of the distal radius. Juxta-articular plates may be used for more complex fractures. Placement is as distal as possible on the radius. The locking holes in the head of the plate are angled 5° proximal to the articular surface, to allow a more distal plate placement.
  • Straight plates are contoured to fit the radial column and have a notched tip that allows them to fit on the radial styloid, adjacent to a temporary K-wire fixation.
  • Locking Compression Plates (LCP) have Combi holes which allow locking screw fixation in the threaded section or compression in the non-threaded section of the hole.
  • Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
  • Undercuts on the bottom of the plate head facilitate contouring of the plate to match the anatomy of the distal radius and minimize the
    potential for soft tissue irritation.
  • Rounded edges minimize potential for tendon adhesion.
  • Smaller plates and screws address fracture fragments individually, with less overall implant bulk.
  • Plate available with 5 head holes and 3 and 5 shaft holes.
  • Plates available for Left and Right.
  • Plates available in Titanium.

2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-II, Right/Left uses

2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-II, Right/Left is used or fixation of complex intra and extra-articular fractures and osteotomies of the distal radius and other small bones.

The post Locking Plate Extra-Articular Volar Distal Radius 2.4/2.7mm 5 Hole Head Type-II, Right/Left first appeared on Archoverseas.

]]> Locking Plate Extra-Articular Volar Distal Radius 2.4/2.7mm 5 Hole Head Type-III, Right/Left https://archoverseas.com/product/locking-plate-extra-articular-volar-distal-radius-2-4-2-7mm-5-hole-head-type-iii-right-left-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-plate-extra-articular-volar-distal-radius-2-4-2-7mm-5-hole-head-type-iii-right-left-4 Fri, 21 Feb 2025 13:08:02 +0000 https://archoverseas.com/?post_type=product&p=18609 Ref. No. Ti Ref. No. SS Position Size Ref. No. Ti Ref. No. SS Position Size LCP676703 LCP676704 LCP676705 VS-003L VS-004L VS-005L Right Right Right 3H 4H 5H LCP676803 LCP676804 LCP676805 VS-003R VS-004R VS-005R Left Left Left 3H 4H 5H 2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-III, Right/Left Specification 2.4/2.7mm Locking Plate […]

The post Locking Plate Extra-Articular Volar Distal Radius 2.4/2.7mm 5 Hole Head Type-III, Right/Left first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Position Size Ref. No. Ti Ref. No. SS Position Size LCP676703

LCP676704

LCP676705 VS-003L

VS-004L

VS-005L Right

Right

Right 3H

4H

5H LCP676803

LCP676804

LCP676805 VS-003R

VS-004R

VS-005R Left

Left

Left 3H

4H

5H

2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-III, Right/Left Specification

  • 2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-III, Right/Left is precontoured with a complex bend designed to fit the volar surface of the distal radius. Juxta-articular plates may be used for more complex fractures. Placement is as distal as possible on the radius. The locking holes in the head of the plate are angled 5° proximal to the articular surface, to allow a more distal plate placement.
  • Straight plates are contoured to fit the radial column and have a notched tip that allows them to fit on the radial styloid, adjacent to a temporary K-wire fixation.
  • Locking Compression Plates (LCP) have Combi holes which allow locking screw fixation in the threaded section or compression in the non-threaded section of the hole.
  • Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
  • Undercuts on the bottom of the plate head facilitate contouring of the plate to match the anatomy of the distal radius and minimize the
    potential for soft tissue irritation.
  • Rounded edges minimize potential for tendon adhesion.
  • Smaller plates and screws address fracture fragments individually, with less overall implant bulk.
  • Plate available with 5 head holes and 3 and 5 shaft holes.
  • Plates available for Left and Right.
  • Plates available in Titanium.

2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-III, Right/Left uses

2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-III, Right/Left is used or fixation of complex intra and extra-articular fractures and osteotomies of the distal radius and other small bones.

The post Locking Plate Extra-Articular Volar Distal Radius 2.4/2.7mm 5 Hole Head Type-III, Right/Left first appeared on Archoverseas.

]]> Locking Plate Extra-Articular Volar Distal Radius 2.4/2.7mm 5 Hole Head Type-I, Right/Left https://archoverseas.com/product/locking-plate-extra-articular-volar-distal-radius-2-4-2-7mm-5-hole-head-type-i-right-left-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-plate-extra-articular-volar-distal-radius-2-4-2-7mm-5-hole-head-type-i-right-left-4 Fri, 21 Feb 2025 13:08:01 +0000 https://archoverseas.com/?post_type=product&p=18607 Ref. No. Ti Ref. No. SS Position Size Ref. No. Ti Ref. No. SS Position Size LCP676303 LCP676304 LCP676305 VD-003R VD-004R VD-005R Right Right Right 3H 4H 5H LCP676403 LCP676404 LCP676405 VD-003L VD-004L VD-005L Left Left Left 3H 4H 5H 2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-I, Right/Left Specification 2.4/2.7mm Locking Plate […]

The post Locking Plate Extra-Articular Volar Distal Radius 2.4/2.7mm 5 Hole Head Type-I, Right/Left first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Position Size Ref. No. Ti Ref. No. SS Position Size LCP676303

LCP676304

LCP676305 VD-003R

VD-004R

VD-005R Right

Right

Right 3H

4H

5H LCP676403

LCP676404

LCP676405 VD-003L

VD-004L

VD-005L Left

Left

Left 3H

4H

5H

2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-I, Right/Left Specification

  • 2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-I, Right/Left is precontoured for anatomic fit of the volar aspect of the distal radius, so that plate placement is away from the articular surface. Extra-articular volar distal radius plates can be used for simple intra or extra-articular fractures. Diverging screw angles secure the radial styloid and other distal fragments.
  • Straight plates are contoured to fit the radial column and have a notched tip that allows them to fit on the radial styloid, adjacent to a
    temporary K-wire fixation.
  • Locking Compression Plates (LCP) have Combi holes which allow locking screw fixation in the threaded section or compression in the non-threaded section of the hole.
  • Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
  • Low plate-and-screw profile minimizes potential for tendon and soft tissue irritation..
  • Rounded edges minimize potential for tendon adhesion.
  • Smaller plates and screws address fracture fragments individually, with less overall implant bulk.
  • Plates available holes are 3, 4 and 5.
  • Plates available for Left and Right.
  • Plates available in Titanium.

2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-I, Right/Left uses

2.4/2.7mm Locking Plate Extra-Articular Volar Distal Radius 5 Hole Head Type-I, Right/Left is used or fixation of complex intra- and extra-articular fractures and osteotomies of the distal radius and other small bones.

The post Locking Plate Extra-Articular Volar Distal Radius 2.4/2.7mm 5 Hole Head Type-I, Right/Left first appeared on Archoverseas.

]]> Locking Plate Proximal Radius 2.4/2.7mm (Locking Neck Plate For Radial Head) https://archoverseas.com/product/locking-plate-proximal-radius-2-4-2-7mm-locking-neck-plate-for-radial-head-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-plate-proximal-radius-2-4-2-7mm-locking-neck-plate-for-radial-head-4 Fri, 21 Feb 2025 13:08:00 +0000 https://archoverseas.com/?post_type=product&p=18604 Ref. No. Ti Ref. No. SS Size LCP730002 LCP730003 LCP730004 NHP-002 NHP-003 NHP-004 2H 3H 4H 2.4/2.7mm Locking Plate Proximal Radius (Locking Neck Plate For Radial Head) Specification Plates are precontoured for anatomical fit. Combi holes allow fixation with locking screws in the threaded section for angular stability, and cortex screws in the Dynamic Compression […]

The post Locking Plate Proximal Radius 2.4/2.7mm (Locking Neck Plate For Radial Head) first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Size LCP730002

LCP730003

LCP730004 NHP-002

NHP-003

NHP-004 2H

3H

4H

2.4/2.7mm Locking Plate Proximal Radius (Locking Neck Plate For Radial Head) Specification

  • Plates are precontoured for anatomical fit.
  • Combi holes allow fixation with locking screws in the threaded section for angular stability, and cortex screws in the Dynamic Compression Unit (DCU) section for distraction. A fixed-angle construct provides advantages in osteopenic bone or multifragment fractures, where traditional
    screw purchase is compromised.
  • The holes in the head of the plate accept 2.4mm locking screws and 2mm cortex screws.
  • The shaft holes accept 2.4mm locking screws in the threaded portion or 2.7mm cortex screws and 2.4mm cortex screws in the distraction portion.
  • Plates available holes are 2, 3 and 4
  • Plates available in Titanium.

2.4/2.7mm Locking Plate Proximal Radius (Locking Neck Plate For Radial Head) uses

2.4/2.7mm Locking Plate Proximal Radius (Locking Neck Plate For Radial Head) indicated for Extra-articular and intra-articular fractures of the proximal radius and multifragmented radial neck fractures.

The post Locking Plate Proximal Radius 2.4/2.7mm (Locking Neck Plate For Radial Head) first appeared on Archoverseas.

]]>