Locking Screws - Archoverseas https://archoverseas.com My WordPress Blog Thu, 20 Feb 2025 05:20:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.1 https://archoverseas.com/wp-content/uploads/2024/11/cropped-Untitled-design-32x32.png Locking Screws - Archoverseas https://archoverseas.com 32 32 Locking Head Screw, Dia-5.0mm-Self Tapping https://archoverseas.com/product/locking-head-screw-dia-5-0mm-self-tapping-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-head-screw-dia-5-0mm-self-tapping-4 Wed, 19 Feb 2025 11:09:04 +0000 https://archoverseas.com/?post_type=product&p=18270 Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP552014 LCP552016 LCP552018 LCP552020 LCP552022 LCP552024 LCP552026 LCP552028 LCP552030 LCP552032 LCP552034 LCP552036 LCP552038 LCP552040 PP-014 PP-016 PP-018 PP-020 PP-022 PP-024 PP-026 PP-028 PP-030 PP-032 PP-034 PP-036 PP-038 PP-040 14mm 16mm 18mm 20mm 22mm 24mm 26mm 28mm 30mm 32mm 34mm 36mm 38mm […]

The post Locking Head Screw, Dia-5.0mm-Self Tapping first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP552014

LCP552016

LCP552018

LCP552020

LCP552022

LCP552024

LCP552026

LCP552028

LCP552030

LCP552032

LCP552034

LCP552036

LCP552038

LCP552040 PP-014

PP-016

PP-018

PP-020

PP-022

PP-024

PP-026

PP-028

PP-030

PP-032

PP-034

PP-036

PP-038

PP-040 14mm

16mm

18mm

20mm

22mm

24mm

26mm

28mm

30mm

32mm

34mm

36mm

38mm

40mm LCP552042

LCP552044

LCP552046

LCP552048

LCP552050

LCP552055

LCP552060

LCP552065

LCP552070

LCP552075

LCP552080

LCP552085

LCP552090 PP-042

PP-044

PP-046

PP-048

PP-050

PP-055

PP-060

PP-065

PP-070

PP-075

PP-080

PP-085

PP-090 42mm

44mm

46mm

48mm

50mm

55mm

60mm

65mm

70mm

75mm

80mm

85mm

90mm

5 mm Locking Head Screw Specification

  • 5 mm Locking Head Screw available lengths are 14mm, 16mm, 18mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm and 90mm.
  • Screws available thread lengths are 16 mm thread, 32 mm thread and Fully threaded.
  • 5 mm Locking Head Screw is made from pure Titanium and SS 316L.
  • Low-profile head helps reduce possibility of soft tissue irritation .
  • Reverse-cutting flutes assist in screw removal.
  • Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression.
  • Locking Head Screw thread profile uses deep cutting threads with a large pitch to increase resistance to pullout. The large pitch also accelerates screw insertion and removal.
  • Self-drilling, self-tapping screw tip facilitates screw insertion by eliminating the need for predrilling and tapping in most cases.
  • Any additional length sizes of this screw will be made on demand.
  • This is Self Tapping Screw. Self Tapping Screws cuts its own thread while being driven into the bone. It makes a small hole while entering the bone which creates a tight friction fit between the threads. This helps fight vibration loosening and allows the parts to be taken apart if needed..
  • Instruments are available for this screw such as Bone Taps, Combined Drill & Tap Sleeve, Counter Sink, Depth Gauge, Drill Bits, Drill Guide, Drill Sleeve, Hollow Mill Screw Removal, Reverse Measuring Device, Screw Drivers and Screw Holding Forceps etc.

5 mm Locking Head Screw uses

5 mm Locking Head Screw is intended for fracture fixation of large bones and large bone fragments.
This Screw is also indicated for:

  • Femoral neck fractures
  • Slipped capital femoral epiphyses
  • As an adjunct to DHS in basilar neck fractures
  • Tibial plateau fractures
  • Ankle arthrodeses
  • Pediatric femoral neck fractures
  • Intercondylar femur fractures
  • Sacroiliac joint disruptions
  • Subtalar arthrodeses

Bone screws are the most commonly used orthopedic implants. There are many different types and sizes of screws for different types of bones. Most bone screws are made out of stainless steel or titanium alloys. The outer diameter, root diameter, and thread pitch and angle are important in determining screw mechanics.

In orthopedics, screws are typically described by their outer diameter, for example, a “5 mm Locking Head Screw” has an outside diameter of 5 mm. The pitch of a screw is the linear distance travelled by a screw for one full turn of the screw. The screw advances by a distance equal to the distance between the threads with each full turn. Cortical screws have a lower pitch and therefore more number of threads. Locking bone screws have a greater depth of the screw to increase the surface area and therefore improve the purchase, as the bone is weaker.

Screws function by converting the tightening torque into internal tension in the screw and elastic reactions in the surrounding bone. This creates compression between the fracture fragments that the screw is holding together. This Screw is typically inserted into holes drilled equal to the root diameter and are either self-tapping or are inserted tapped (threaded) holes. The torque to insert cortical bone screws can be high, so the screws must be properly inserted into the correct size drilled hole and designed to withstand insertion torque levels expected in cortical bone. Locking bone screws have large, deep threads that grip the spongy bone well. Because of the relatively low strength of the cancellous bone, failure of the screw itself during insertion is rare, but pull out can be an issue.

The post Locking Head Screw, Dia-5.0mm-Self Tapping first appeared on Archoverseas.

]]> Locking Head Cannulated Cancellous Screw Dia-6.5mm “Full Thread” https://archoverseas.com/product/locking-head-cannulated-cancellous-screw-dia-6-5mm-full-thread-2/?utm_source=rss&utm_medium=rss&utm_campaign=locking-head-cannulated-cancellous-screw-dia-6-5mm-full-thread-2 Wed, 19 Feb 2025 11:09:03 +0000 https://archoverseas.com/?post_type=product&p=18268 Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP660025 LCP660030 LCP660035 LCP660040 LCP660045 LCP660050 LCP660055 LCP660060 LCP660065 6100-25 6100-30 6100-35 6100-40 6100-45 6100-50 6100-55 6100-60 6100-65 25mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm LCP660070 LCP660075 LCP660080 LCP660085 LCP660090 LCP660095 LCP660100 LCP6600105 LCP6600110 6100-70 6100-75 6100-80 6100-85 6100-90 […]

The post Locking Head Cannulated Cancellous Screw Dia-6.5mm “Full Thread” first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP660025

LCP660030

LCP660035

LCP660040

LCP660045

LCP660050

LCP660055

LCP660060

LCP660065 6100-25

6100-30

6100-35

6100-40

6100-45

6100-50

6100-55

6100-60

6100-65 25mm

30mm

35mm

40mm

45mm

50mm

55mm

60mm

65mm LCP660070

LCP660075

LCP660080

LCP660085

LCP660090

LCP660095

LCP660100

LCP6600105

LCP6600110 6100-70

6100-75

6100-80

6100-85

6100-90

6100-95

6100-100

6100-105

6100-110 70mm

75mm

80mm

85mm

90mm

95mm

100mm

105mm

110mm

6.5mm Locking Head Cannulated Cancellous Screw “Full Thread” Specification

  • 6.5mm Locking Head Cannulated Cancellous screws shaft accepts 2.8mm diameter guide wires.Hemispherical head ensures optimal annular contact with washers and plates when screws are angled.
  • Low-profile head helps reduce possibility of soft tissue irritation .
  • Reverse-cutting flutes assist in screw removal.
  • Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression.
  • Cancellous thread profile uses deep cutting threads with a large pitch to increase resistance to pullout. The large pitch also accelerates screw insertion and removal.
  • Self-drilling, self-tapping screw tip facilitates screw insertion by eliminating the need for predrilling and tapping in most cases.
  • Screws available lengths are 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm and 110mm.
  • Screws available thread lengths are 16 mm thread, 32 mm thread and Fully threaded.
  • Screws available in both Titanium and Stainless steel.

6.5mm Locking Head Cannulated Cancellous Screw “Full Thread” uses

6.5mm Locking Head Cannulated Cancellous Screw are intended for fracture fixation of large bones and large bone fragments.
6.5mm Locking Head Cannulated Cancellous Screw are also indicated for:

  • Femoral neck fractures
  • Slipped capital femoral epiphyses
  • As an adjunct to DHS in basilar neck fractures
  • Tibial plateau fractures
  • Ankle arthrodeses
  • Pediatric femoral neck fractures
  • Intercondylar femur fractures
  • Sacroiliac joint disruptions
  • Subtalar arthrodeses

The post Locking Head Cannulated Cancellous Screw Dia-6.5mm “Full Thread” first appeared on Archoverseas.

]]> Locking Head Screw, Dia-3.5mm-Self Tapping https://archoverseas.com/product/locking-head-screw-dia-3-5mm-self-tapping-4/?utm_source=rss&utm_medium=rss&utm_campaign=locking-head-screw-dia-3-5mm-self-tapping-4 Wed, 19 Feb 2025 11:09:03 +0000 https://archoverseas.com/?post_type=product&p=18269 Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP451010 LCP451012 LCP451014 LCP451016 LCP451018 LCP451020 LCP451022 LCP451024 LCP451026 LCP451028 LCP451030 LCP451032 OO-010 OO-012 OO-014 OO-016 OO-018 OO-020 OO-022 OO-024 OO-026 OO-028 OO-030 OO-032 10mm 12mm 14mm 16mm 18mm 20mm 22mm 24mm 26mm 28mm 30mm 32mm LCP451034 LCP451036 LCP451038 LCP451040 LCP451045 […]

The post Locking Head Screw, Dia-3.5mm-Self Tapping first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP451010

LCP451012

LCP451014

LCP451016

LCP451018

LCP451020

LCP451022

LCP451024

LCP451026

LCP451028

LCP451030

LCP451032 OO-010

OO-012

OO-014

OO-016

OO-018

OO-020

OO-022

OO-024

OO-026

OO-028

OO-030

OO-032 10mm

12mm

14mm

16mm

18mm

20mm

22mm

24mm

26mm

28mm

30mm

32mm LCP451034

LCP451036

LCP451038

LCP451040

LCP451045

LCP451050

LCP451055

LCP451060

LCP451065

LCP451070

LCP451075

LCP451080 OO-034

OO-036

OO-038

OO-040

OO-045

OO-050

OO-055

OO-060

OO-065

OO-070

OO-075

OO-080 34mm

36mm

38mm

40mm

45mm

50mm

55mm

60mm

65mm

70mm

75mm

80mm

3.5 mm Locking Head Screw Specification

  • 3.5 mm Locking Head Screw available lengths are 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm, 44mm, 46mm, 48mm, 50mm, 52mm, 54mm, 56mm, 58mm, 60mm, 65mm, 70mm, 75mm, 80mm.
  • 3.5 mm Locking Head Screw is made from pure Titanium and SS 316L.
  • Any additional length sizes of this screw will be made on demand.
  • This is Self Tapping Screw. Self Tapping Screws cuts its own thread while being driven into the bone. It makes a small hole while entering the bone which creates a tight friction fit between the threads. This helps fight vibration loosening and allows the parts to be taken apart if needed..
  • Instruments are available for this screw such as Bone Taps, Combined Drill & Tap Sleeve, Counter Sink, Depth Gauge, Drill Bits, Drill Guide, Drill Sleeve, Hollow Mill Screw Removal, Reverse Measuring Device, Screw Drivers and Screw Holding Forceps etc.

3.5 mm Locking Head Screw uses

3.5 mm Locking Head Screw is intended for fracture fixation of large bones and large bone fragments.
This Screw is also indicated for:

  • Femoral neck fractures
  • Slipped capital femoral epiphyses
  • As an adjunct to DHS in basilar neck fractures
  • Tibial plateau fractures
  • Ankle arthrodeses
  • Pediatric femoral neck fractures
  • Intercondylar femur fractures
  • Sacroiliac joint disruptions
  • Subtalar arthrodeses

Bone screws are the most commonly used orthopedic implants. There are many different types and sizes of screws for different types of bones. Most bone screws are made out of stainless steel or titanium alloys. The outer diameter, root diameter, and thread pitch and angle are important in determining screw mechanics.

In orthopedics, screws are typically described by their outer diameter, for example, a “3.5 mm Locking Head Screw” has an outside diameter of 3.5 mm. The pitch of a screw is the linear distance travelled by a screw for one full turn of the screw. The screw advances by a distance equal to the distance between the threads with each full turn. Cortical screws have a lower pitch and therefore more number of threads. Locking bone screws have a greater depth of the screw to increase the surface area and therefore improve the purchase, as the bone is weaker.

Screws function by converting the tightening torque into internal tension in the screw and elastic reactions in the surrounding bone. This creates compression between the fracture fragments that the screw is holding together. This Screw is typically inserted into holes drilled equal to the root diameter and are either self-tapping or are inserted tapped (threaded) holes. The torque to insert cortical bone screws can be high, so the screws must be properly inserted into the correct size drilled hole and designed to withstand insertion torque levels expected in cortical bone. Locking bone screws have large, deep threads that grip the spongy bone well. Because of the relatively low strength of the locking bone, failure of the screw itself during insertion is rare, but pull out can be an issue.

The post Locking Head Screw, Dia-3.5mm-Self Tapping first appeared on Archoverseas.

]]> Locking Head Cannulated Cancellous Screw Dia-3.5mm “Full Thread” https://archoverseas.com/product/locking-head-cannulated-cancellous-screw-dia-3-5mm-full-thread-2/?utm_source=rss&utm_medium=rss&utm_campaign=locking-head-cannulated-cancellous-screw-dia-3-5mm-full-thread-2 Wed, 19 Feb 2025 11:09:02 +0000 https://archoverseas.com/?post_type=product&p=18264 Ref. No. Ti Ref. No. SS Length LCCS-35F-014 LCCS-35F-016 LCCS-35F-018 LCCS-35F-020 LCCS-35F-022 LCCS-35F-024 LCCS-35F-026 LCCS-35F-028 LCCS-35F-030 LCCS-35F-035 LCCS-35F-040 LCCS-35F-045 LCCS-35F-050 LCCS-35F-055 LCCS-35F-060 LC683-14 LC683-16 LC683-18 LC683-20 LC683-22 LC683-24 LC683-26 LC683-28 LC683-30 LC683-35 LC683-40 LC683-45 LC683-50 LC683-55 LC683-60 14mm 16mm 18mm 20mm 22mm 24mm 26mm 28mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 3.5mm Locking Head […]

The post Locking Head Cannulated Cancellous Screw Dia-3.5mm “Full Thread” first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Length LCCS-35F-014

LCCS-35F-016

LCCS-35F-018

LCCS-35F-020

LCCS-35F-022

LCCS-35F-024

LCCS-35F-026

LCCS-35F-028

LCCS-35F-030

LCCS-35F-035

LCCS-35F-040

LCCS-35F-045

LCCS-35F-050

LCCS-35F-055

LCCS-35F-060 LC683-14

LC683-16

LC683-18

LC683-20

LC683-22

LC683-24

LC683-26

LC683-28

LC683-30

LC683-35

LC683-40

LC683-45

LC683-50

LC683-55

LC683-60 14mm

16mm

18mm

20mm

22mm

24mm

26mm

28mm

30mm

35mm

40mm

45mm

50mm

55mm

60mm

3.5mm Locking Head Cannulated Cancellous Screw “Full Thread” Specification

  • 3.5mm Locking Head Cannulated Cancellous screws shaft accepts 2.8mm diameter guide wires.Hemispherical head ensures optimal annular contact with washers and plates when screws are angled.
  • Low-profile head helps reduce possibility of soft tissue irritation .
  • Reverse-cutting flutes assist in screw removal.
  • Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression.
  • Cancellous thread profile uses deep cutting threads with a large pitch to increase resistance to pullout. The large pitch also accelerates screw insertion and removal.
  • Self-drilling, self-tapping screw tip facilitates screw insertion by eliminating the need for predrilling and tapping in most cases.
  • Screws available lengths are 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm and 60mm.
  • Screws available thread lengths are 16 mm thread, 32 mm thread and Fully threaded.
  • Screws available in both Titanium and Stainless steel.

3.5mm Locking Head Cannulated Cancellous Screw “Full Thread” uses

3.5mm Locking Head Cannulated Cancellous Screw are intended for fracture fixation of large bones and large bone fragments.
3.5mm Locking Head Cannulated Cancellous Screw are also indicated for:

  • Femoral neck fractures
  • Slipped capital femoral epiphyses
  • As an adjunct to DHS in basilar neck fractures
  • Tibial plateau fractures
  • Ankle arthrodeses
  • Pediatric femoral neck fractures
  • Intercondylar femur fractures
  • Sacroiliac joint disruptions
  • Subtalar arthrodeses

The post Locking Head Cannulated Cancellous Screw Dia-3.5mm “Full Thread” first appeared on Archoverseas.

]]> Locking Head Cannulated Cancellous Screw Dia-3.5mm “Short Thread” https://archoverseas.com/product/locking-head-cannulated-cancellous-screw-dia-3-5mm-short-thread-2/?utm_source=rss&utm_medium=rss&utm_campaign=locking-head-cannulated-cancellous-screw-dia-3-5mm-short-thread-2 Wed, 19 Feb 2025 11:09:02 +0000 https://archoverseas.com/?post_type=product&p=18265 Ref. No. Ti Ref. No. SS Length LCCS-35S-014 LCCS-35S-016 LCCS-35S-018 LCCS-35S-020 LCCS-35S-022 LCCS-35S-024 LCCS-35S-026 LCCS-35S-028 LCCS-35S-030 LCCS-35S-035 LCCS-35S-040 LCCS-35S-045 LCCS-35S-050 LCCS-35S-055 LCCS-35S-060 LC684-14 LC684-16 LC684-18 LC684-20 LC684-22 LC684-24 LC684-26 LC684-28 LC684-30 LC684-35 LC684-40 LC684-45 LC684-50 LC684-55 LC684-60 14mm 16mm 18mm 20mm 22mm 24mm 26mm 28mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 3.5mm Locking Head […]

The post Locking Head Cannulated Cancellous Screw Dia-3.5mm “Short Thread” first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Length LCCS-35S-014

LCCS-35S-016

LCCS-35S-018

LCCS-35S-020

LCCS-35S-022

LCCS-35S-024

LCCS-35S-026

LCCS-35S-028

LCCS-35S-030

LCCS-35S-035

LCCS-35S-040

LCCS-35S-045

LCCS-35S-050

LCCS-35S-055

LCCS-35S-060 LC684-14

LC684-16

LC684-18

LC684-20

LC684-22

LC684-24

LC684-26

LC684-28

LC684-30

LC684-35

LC684-40

LC684-45

LC684-50

LC684-55

LC684-60 14mm

16mm

18mm

20mm

22mm

24mm

26mm

28mm

30mm

35mm

40mm

45mm

50mm

55mm

60mm

3.5mm Locking Head Cannulated Cancellous Screw “Short Thread” Specification

  • 3.5mm Locking Head Cannulated Cancellous screws shaft accepts 2.8mm diameter guide wires.Hemispherical head ensures optimal annular contact with washers and plates when screws are angled.
  • Low-profile head helps reduce possibility of soft tissue irritation .
  • Reverse-cutting flutes assist in screw removal.
  • Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression.
  • Cancellous thread profile uses deep cutting threads with a large pitch to increase resistance to pullout. The large pitch also accelerates screw insertion and removal.
  • Self-drilling, self-tapping screw tip facilitates screw insertion by eliminating the need for predrilling and tapping in most cases.
  • Screws available lengths are 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm and 60mm.
  • Screws available thread lengths are 16 mm thread, 32 mm thread and Fully threaded.
  • Screws available in both Titanium and Stainless steel.

3.5mm Locking Head Cannulated Cancellous Screw “Short Thread” uses

3.5mm Locking Head Cannulated Cancellous Screw are intended for fracture fixation of large bones and large bone fragments.
3.5mm Locking Head Cannulated Cancellous Screw are also indicated for:

  • Femoral neck fractures
  • Slipped capital femoral epiphyses
  • As an adjunct to DHS in basilar neck fractures
  • Tibial plateau fractures
  • Ankle arthrodeses
  • Pediatric femoral neck fractures
  • Intercondylar femur fractures
  • Sacroiliac joint disruptions
  • Subtalar arthrodeses

The post Locking Head Cannulated Cancellous Screw Dia-3.5mm “Short Thread” first appeared on Archoverseas.

]]> Locking Head Cannulated Cancellous Screw Dia-6.5mm “16mm Thread” https://archoverseas.com/product/locking-head-cannulated-cancellous-screw-dia-6-5mm-16mm-thread-2/?utm_source=rss&utm_medium=rss&utm_campaign=locking-head-cannulated-cancellous-screw-dia-6-5mm-16mm-thread-2 Wed, 19 Feb 2025 11:09:02 +0000 https://archoverseas.com/?post_type=product&p=18266 Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP661630 LCP661635 LCP661640 LCP661645 LCP661650 LCP661655 LCP661660 LCP661665 LCP661670 6116-30 6116-35 6116-40 6116-45 6116-50 6116-55 6116-60 6116-65 6116-70 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm LCP661675 LCP661680 LCP661685 LCP661690 LCP661695 LCP6616100 LCP6616105 LCP6616110 6116-75 6116-80 6116-85 6116-90 6116-95 6116-100 […]

The post Locking Head Cannulated Cancellous Screw Dia-6.5mm “16mm Thread” first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP661630

LCP661635

LCP661640

LCP661645

LCP661650

LCP661655

LCP661660

LCP661665

LCP661670 6116-30

6116-35

6116-40

6116-45

6116-50

6116-55

6116-60

6116-65

6116-70 30mm

35mm

40mm

45mm

50mm

55mm

60mm

65mm

70mm LCP661675

LCP661680

LCP661685

LCP661690

LCP661695

LCP6616100

LCP6616105

LCP6616110 6116-75

6116-80

6116-85

6116-90

6116-95

6116-100

6116-105

6116-110 75mm

80mm

85mm

90mm

95mm

100mm

105mm

110mm

6.5mm Locking Head Cannulated Cancellous Screw “16mm Thread” Specification

  • 6.5mm Locking Head Cannulated Cancellous screws shaft accepts 2.8mm diameter guide wires.Hemispherical head ensures optimal annular contact with washers and plates when screws are angled.
  • Low-profile head helps reduce possibility of soft tissue irritation .
  • Reverse-cutting flutes assist in screw removal.
  • Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression.
  • Cancellous thread profile uses deep cutting threads with a large pitch to increase resistance to pullout. The large pitch also accelerates screw insertion and removal.
  • Self-drilling, self-tapping screw tip facilitates screw insertion by eliminating the need for predrilling and tapping in most cases.
  • Screws available lengths are 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm and 110mm.
  • Screws available thread lengths are 16 mm thread, 32 mm thread and Fully threaded.
  • Screws available in both Titanium and Stainless steel.

6.5mm Locking Head Cannulated Cancellous Screw “16mm Thread” uses

6.5mm Locking Head Cannulated Cancellous Screw are intended for fracture fixation of large bones and large bone fragments.
6.5mm Locking Head Cannulated Cancellous Screw are also indicated for:

  • Femoral neck fractures
  • Slipped capital femoral epiphyses
  • As an adjunct to DHS in basilar neck fractures
  • Tibial plateau fractures
  • Ankle arthrodeses
  • Pediatric femoral neck fractures
  • Intercondylar femur fractures
  • Sacroiliac joint disruptions
  • Subtalar arthrodeses

The post Locking Head Cannulated Cancellous Screw Dia-6.5mm “16mm Thread” first appeared on Archoverseas.

]]> Locking Head Cannulated Cancellous Screw Dia-6.5mm “32mm Thread” https://archoverseas.com/product/locking-head-cannulated-cancellous-screw-dia-6-5mm-32mm-thread-2/?utm_source=rss&utm_medium=rss&utm_campaign=locking-head-cannulated-cancellous-screw-dia-6-5mm-32mm-thread-2 Wed, 19 Feb 2025 11:09:02 +0000 https://archoverseas.com/?post_type=product&p=18267 Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP663240 LCP663245 LCP663250 LCP663255 LCP663260 LCP663265 LCP663270 LCP663275 6132-40 6132-45 6132-50 6132-55 6132-60 6132-65 6132-70 6132-75 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm LCP663280 LCP663285 LCP663290 LCP663295 LCP6632100 LCP6632105 LCP6632110 6132-80 6132-85 6132-90 6132-95 6132-100 6132-105 6132-110 80mm 85mm 90mm […]

The post Locking Head Cannulated Cancellous Screw Dia-6.5mm “32mm Thread” first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP663240

LCP663245

LCP663250

LCP663255

LCP663260

LCP663265

LCP663270

LCP663275 6132-40

6132-45

6132-50

6132-55

6132-60

6132-65

6132-70

6132-75 40mm

45mm

50mm

55mm

60mm

65mm

70mm

75mm LCP663280

LCP663285

LCP663290

LCP663295

LCP6632100

LCP6632105

LCP6632110 6132-80

6132-85

6132-90

6132-95

6132-100

6132-105

6132-110 80mm

85mm

90mm

95mm

100mm

105mm

110mm

6.5mm Locking Head Cannulated Cancellous Screw “32mm Thread” Specification

  • 6.5mm Locking Head Cannulated Cancellous screws shaft accepts 2.8mm diameter guide wires.Hemispherical head ensures optimal annular contact with washers and plates when screws are angled.
  • Low-profile head helps reduce possibility of soft tissue irritation .
  • Reverse-cutting flutes assist in screw removal.
  • Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression.
  • Cancellous thread profile uses deep cutting threads with a large pitch to increase resistance to pullout. The large pitch also accelerates screw insertion and removal.
  • Self-drilling, self-tapping screw tip facilitates screw insertion by eliminating the need for predrilling and tapping in most cases.
  • Screws available lengths are 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm and 110mm.
  • Screws available thread lengths are 16 mm thread, 32 mm thread and Fully threaded.
  • Screws available in both Titanium and Stainless steel.

6.5mm Locking Head Cannulated Cancellous Screw “32mm Thread” uses

6.5mm Locking Head Cannulated Cancellous Screw are intended for fracture fixation of large bones and large bone fragments.
6.5mm Locking Head Cannulated Cancellous Screw are also indicated for:

  • Femoral neck fractures
  • Slipped capital femoral epiphyses
  • As an adjunct to DHS in basilar neck fractures
  • Tibial plateau fractures
  • Ankle arthrodeses
  • Pediatric femoral neck fractures
  • Intercondylar femur fractures
  • Sacroiliac joint disruptions
  • Subtalar arthrodeses

The post Locking Head Cannulated Cancellous Screw Dia-6.5mm “32mm Thread” first appeared on Archoverseas.

]]> Locking Head Cannulated Cancellous Screw Dia-5.0mm “16mm Thread” https://archoverseas.com/product/locking-head-cannulated-cancellous-screw-dia-5-0mm-16mm-thread-3/?utm_source=rss&utm_medium=rss&utm_campaign=locking-head-cannulated-cancellous-screw-dia-5-0mm-16mm-thread-3 Wed, 19 Feb 2025 11:09:01 +0000 https://archoverseas.com/?post_type=product&p=18261 Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP511630 LCP511635 LCP511640 LCP511645 LCP511650 LCP511655 LCP511660 LCP511665 LCP511670 5116-30 5116-35 5116-40 5116-45 5116-50 5116-55 5116-60 5116-65 5116-70 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm LCP511675 LCP511680 LCP511685 LCP511690 LCP511695 LCP5116100 LCP5116105 LCP5116110 5116-75 5116-80 5116-85 5116-90 5116-95 5116-100 […]

The post Locking Head Cannulated Cancellous Screw Dia-5.0mm “16mm Thread” first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP511630

LCP511635

LCP511640

LCP511645

LCP511650

LCP511655

LCP511660

LCP511665

LCP511670 5116-30

5116-35

5116-40

5116-45

5116-50

5116-55

5116-60

5116-65

5116-70 30mm

35mm

40mm

45mm

50mm

55mm

60mm

65mm

70mm LCP511675

LCP511680

LCP511685

LCP511690

LCP511695

LCP5116100

LCP5116105

LCP5116110 5116-75

5116-80

5116-85

5116-90

5116-95

5116-100

5116-105

5116-110 75mm

80mm

85mm

90mm

95mm

100mm

105mm

110mm

5.0mm Locking Head Cannulated Cancellous Screw “16mm Thread” Specification

  • 5.0mm Locking Head Cannulated Cancellous screws shaft accepts 2.8mm diameter guide wires.Hemispherical head ensures optimal annular contact with washers and plates when screws are angled.
  • Low-profile head helps reduce possibility of soft tissue irritation .
  • Reverse-cutting flutes assist in screw removal.
  • Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression.
  • Cancellous thread profile uses deep cutting threads with a large pitch to increase resistance to pullout. The large pitch also accelerates screw insertion and removal.
  • Self-drilling, self-tapping screw tip facilitates screw insertion by eliminating the need for predrilling and tapping in most cases.
  • Screws available lengths are 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm and 110mm.
  • Screws available thread lengths are 16 mm thread, 32 mm thread and Fully threaded.
  • Screws available in both Titanium and Stainless steel.

5.0mm Locking Head Cannulated Cancellous Screw “16mm Thread” uses

5.0mm Locking Head Cannulated Cancellous Screw are intended for fracture fixation of large bones and large bone fragments.
5.0mm Locking Head Cannulated Cancellous Screw are also indicated for:

  • Femoral neck fractures
  • Slipped capital femoral epiphyses
  • As an adjunct to DHS in basilar neck fractures
  • Tibial plateau fractures
  • Ankle arthrodeses
  • Pediatric femoral neck fractures
  • Intercondylar femur fractures
  • Sacroiliac joint disruptions
  • Subtalar arthrodeses

The post Locking Head Cannulated Cancellous Screw Dia-5.0mm “16mm Thread” first appeared on Archoverseas.

]]> Locking Head Cannulated Cancellous Screw Dia-5.0mm “32mm Thread” https://archoverseas.com/product/locking-head-cannulated-cancellous-screw-dia-5-0mm-32mm-thread-2/?utm_source=rss&utm_medium=rss&utm_campaign=locking-head-cannulated-cancellous-screw-dia-5-0mm-32mm-thread-2 Wed, 19 Feb 2025 11:09:01 +0000 https://archoverseas.com/?post_type=product&p=18262 Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP513240 LCP513245 LCP513250 LCP513255 LCP513260 LCP513265 LCP513270 LCP513275 5132-40 5132-45 5132-50 5132-55 5132-60 5132-65 5132-70 5132-75 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm LCP513280 LCP513285 LCP513290 LCP513295 LCP5132100 LCP5132105 LCP5132110 5132-80 5132-85 5132-90 5132-95 5132-100 5132-105 5132-110 80mm 85mm 90mm […]

The post Locking Head Cannulated Cancellous Screw Dia-5.0mm “32mm Thread” first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP513240

LCP513245

LCP513250

LCP513255

LCP513260

LCP513265

LCP513270

LCP513275 5132-40

5132-45

5132-50

5132-55

5132-60

5132-65

5132-70

5132-75 40mm

45mm

50mm

55mm

60mm

65mm

70mm

75mm LCP513280

LCP513285

LCP513290

LCP513295

LCP5132100

LCP5132105

LCP5132110 5132-80

5132-85

5132-90

5132-95

5132-100

5132-105

5132-110 80mm

85mm

90mm

95mm

100mm

105mm

110mm

5.0mm Locking Head Cannulated Cancellous Screw “32mm Thread” Specification

  • 5.0mm Locking Head Cannulated Cancellous screws shaft accepts 2.8mm diameter guide wires.Hemispherical head ensures optimal annular contact with washers and plates when screws are angled.
  • Low-profile head helps reduce possibility of soft tissue irritation .
  • Reverse-cutting flutes assist in screw removal.
  • Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression.
  • Cancellous thread profile uses deep cutting threads with a large pitch to increase resistance to pullout. The large pitch also accelerates screw insertion and removal.
  • Self-drilling, self-tapping screw tip facilitates screw insertion by eliminating the need for predrilling and tapping in most cases.
  • Screws available lengths are 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm and 110mm.
  • Screws available thread lengths are 16 mm thread, 32 mm thread and Fully threaded.
  • Screws available in both Titanium and Stainless steel.

5.0mm Locking Head Cannulated Cancellous Screw “32mm Thread” uses

5.0mm Locking Head Cannulated Cancellous Screw are intended for fracture fixation of large bones and large bone fragments.
5.0mm Locking Head Cannulated Cancellous Screw are also indicated for:

  • Femoral neck fractures
  • Slipped capital femoral epiphyses
  • As an adjunct to DHS in basilar neck fractures
  • Tibial plateau fractures
  • Ankle arthrodeses
  • Pediatric femoral neck fractures
  • Intercondylar femur fractures
  • Sacroiliac joint disruptions
  • Subtalar arthrodeses

The post Locking Head Cannulated Cancellous Screw Dia-5.0mm “32mm Thread” first appeared on Archoverseas.

]]> Locking Head Cannulated Cancellous Screw Dia-5.0mm “Full Thread” https://archoverseas.com/product/locking-head-cannulated-cancellous-screw-dia-5-0mm-full-thread-2/?utm_source=rss&utm_medium=rss&utm_campaign=locking-head-cannulated-cancellous-screw-dia-5-0mm-full-thread-2 Wed, 19 Feb 2025 11:09:01 +0000 https://archoverseas.com/?post_type=product&p=18263 Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP510025 LCP510030 LCP510035 LCP510040 LCP510045 LCP510050 LCP510055 LCP510060 LCP510065 5100-25 5100-30 5100-35 5100-40 5100-45 5100-50 5100-55 5100-60 5100-65 25mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm LCP510070 LCP510075 LCP510080 LCP510085 LCP510090 LCP510095 LCP5100100 LCP5100105 LCP5100110 5100-70 5100-75 5100-80 5100-85 5100-90 […]

The post Locking Head Cannulated Cancellous Screw Dia-5.0mm “Full Thread” first appeared on Archoverseas.

]]> Ref. No. Ti Ref. No. SS Length Ref. No. Ti Ref. No. SS Length LCP510025

LCP510030

LCP510035

LCP510040

LCP510045

LCP510050

LCP510055

LCP510060

LCP510065 5100-25

5100-30

5100-35

5100-40

5100-45

5100-50

5100-55

5100-60

5100-65 25mm

30mm

35mm

40mm

45mm

50mm

55mm

60mm

65mm LCP510070

LCP510075

LCP510080

LCP510085

LCP510090

LCP510095

LCP5100100

LCP5100105

LCP5100110 5100-70

5100-75

5100-80

5100-85

5100-90

5100-95

5100-100

5100-105

5100-110 70mm

75mm

80mm

85mm

90mm

95mm

100mm

105mm

110mm

5.0mm Locking Head Cannulated Cancellous Screw “Full Thread” Specification

  • 5.0mm Locking Head Cannulated Cancellous screws shaft accepts 2.8mm diameter guide wires.Hemispherical head ensures optimal annular contact with washers and plates when screws are angled.
  • Low-profile head helps reduce possibility of soft tissue irritation .
  • Reverse-cutting flutes assist in screw removal.
  • Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression.
  • Cancellous thread profile uses deep cutting threads with a large pitch to increase resistance to pullout. The large pitch also accelerates screw insertion and removal.
  • Self-drilling, self-tapping screw tip facilitates screw insertion by eliminating the need for predrilling and tapping in most cases.
  • Screws available lengths are 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm and 110mm.
  • Screws available thread lengths are 16 mm thread, 32 mm thread and Fully threaded.
  • Screws available in both Titanium and Stainless steel.

5.0mm Locking Head Cannulated Cancellous Screw “Full Thread” uses

5.0mm Locking Head Cannulated Cancellous Screw are intended for fracture fixation of large bones and large bone fragments.
5.0mm Locking Head Cannulated Cancellous Screw are also indicated for:

  • Femoral neck fractures
  • Slipped capital femoral epiphyses
  • As an adjunct to DHS in basilar neck fractures
  • Tibial plateau fractures
  • Ankle arthrodeses
  • Pediatric femoral neck fractures
  • Intercondylar femur fractures
  • Sacroiliac joint disruptions
  • Subtalar arthrodeses

The post Locking Head Cannulated Cancellous Screw Dia-5.0mm “Full Thread” first appeared on Archoverseas.

]]>