Shop – Archoverseas

Locking Plate Pediatric Hip 3.5 & 5.0mm

A@rch — Wed, 26 Feb 2025 08:03:00 +0000

Locking Plate Pediatric Hip 3.5mm
Ref. No. Ti	Ref. No. SS	Degree	Length
LCP6673100 LCP6673110 LCP6673120 LCP6673150	BP-100-75 BP-110-75 BP-120-75 BP-150-60	100° 110° 120° 150°	75mm 75mm 75mm 60mm
Locking Plate Pediatric Hip 5.0mm
Ref. No. Ti	Ref. No. SS	Degree	Length
LCP6674100 LCP6674110 LCP6674120 LCP6674150	BP-100-90 BP-110-90 BP-120-95 BP-150-75	100° 110° 120° 150°	90mm 90mm 95mm 75mm

3.5 & 5.0 mm Locking Plate Pediatric Hip Specification

3.5 & 5.0 mm Locking Plate Pediatric Hip cover treatment options for stable fixation of varus and valgus as well as rotation osteotomies and fracture treatment of the proximal femur. 3.5 & 5.0 mm Locking Plate Pediatric Hip have a universal design for the left and right femur. Plate has three neck screws in the proximal part and combi-holes for locking or cortical screws in the distal part. Pediatric Hip Plates have the following main characteristics ensuring excellent fixation in the bone:

Plates available holes are 3 hole in 100°, 3 hole in 110°, 4 hole in 120°, 3, 5, 7 hole in 130° and 3 hole in 150°.
Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
The shaft holes accept 3.5 & 5.0 mm locking screws in the threaded portion or 5 mm cortical screws or 5 mm Locking cancellous screws in the compression portion. Distal locking holes in plate head accept 5 mm locking screws or 5 mm Locking cancellous screws.
3.5 & 5.0 mm Locking Plate Pediatric Hip allow implant placement to address the individual fracture pattern.
Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
Choice of different lengths of plate eliminates the need to cut plates.
Pre-contoured plate to match anatomical shape.
Available in both Titanium and Stainless steel.
locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.
A complete Instruments Set is available for 3.5 & 5.0 mm Locking Plate Pediatric Hip. General Instruments are available for this plate such as Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve etc.
Angular stability – Reduces the risk of primary and secondary loss of correction. Due to the angular stability, a hip spica is no longer necessary in the majority of older cases.
Easy and safe surgical technique – Initial plate positioning with Kirschner wires rather than using a chisel allows easy adjustment without bony damage.
Medialization – For 3.5 & 5.0 mm Locking Plate Pediatric Hip there is the possibility of additional medialization that means that just one off-set is required for each plate size.

3.5 & 5.0 mm Locking Plate Pediatric Hip Uses

3.5 & 5.0 mm Locking Plate Pediatric Hip are indicated for fixation of fractures (including pathologic and impending pathologic fractures) and osteotomies of the femur in infants, children, adolescents and small statured adults.

Specific indications for plates include:

Varus, valgus, rotational and/or shortening osteotomies.
Femoral neck and/or pertrochanteric fractures.
Proximal metaphyseal fractures.
Diaphyseal fractures.
Pathologic fractures.
Prophylactic use for impending pathologic fractures.

Advantages of using locking plate for 3.5 & 5.0 mm Locking Pediatric Hip Plates

3.5 & 5.0 mm Locking Pediatric Hip Plates is a locking plate so it does not have to precisely contact the underlying bone in all areas. When screws are tightened, they “lock” to the threaded screw holes of the plate, stabilizing the segments without pulling the bone to the plate. Locking screws make it impossible for screw insertion to alter the reduction. Non locking plate/screw systems require a precise adaptation of the plate to the underlying bone. Without this close contact, tightening of the screws will pull the bone segments toward the plate, resulting in loss of reduction and possibly the occlusal relationship
Locking plate/screw systems do not disrupt the underlying cortical bone perfusion as much as conventional plates, which compress the plate to the cortical bone.
Screws are unlikely to loosen from the plate. Similarly, if a bone graft is screwed to the plate, a locking head screw will not loosen during the phase of graft incorporation and healing. The possible advantage to this property of a locking plate/screw system is decreased risk of inflammatory complications due to hardware loosening.
Locking plate/screw systems have been shown to provide more stable fixation than conventional non locking plate/screw systems.

Locking Screw Technology

The heads of the locking screws contain male threads while the holes in the plates contain female threads. This allows the screw head to be threaded into the 3.5 & 5.0 mm Locking Plate Pediatric Hip hole, locking the screw into the plate. This technical innovation provides the ability to create a fixed angle construct while using familiar plating techniques.

Locking Plate Technology

By using locking screws in a bone plate, a fixed-angle construct is created. In osteopenic bone or fractures with multiple fragments, secure bone purchase with conventional screws may be compromised. Locking screws do not rely on bone/plate compression to resist patient load, but function similarly to multiple small angled blade plates. In osteopenic bone or comminuted fractures, the ability to lock screws into a fixed-angle construct is imperative.

By combining locking screw holes with compression screw slots in the shaft, the plate can be used as both a locking device and a fracture compression device. If compression is desired, it must be achieved first by inserting the standard screws in the compression screw slots before inserting any locking screws.

3.5 & 5.0 mm Locking Plate Pediatric Hip Contraindications

Contraindications may be qualified or total, and need to be taken into consideration when evaluating the prognosis in each case. Alternative management techniques may need to be considered under the following conditions:

Acute or chronic infections, either local or systemic.
Local or systemic accurate or chronic inflammation.
Serve muscular, nervous or vascular disease endangering the affected area.
Defective bone structures, which would impede adequate anchoring of the implant.
All associated diseases which could endanger the function and success of the implant.

Warnings and Precautionary for 3.5 & 5.0 mm Locking Plate Pediatric Hip

Before using 3.5 & 5.0 mm Locking Plate Pediatric Hip, the surgeon and ancillary staff should study the safety information in these instructions, as well as any product-specific information in the product description, surgical procedures and/or brochures.

Plates are made from medical grade materials and are designed, constructed and produced with utmost care. These quality assure best working results provided they are used in the proper manner. Therefore, the following instructions for use and safety recommendations must be observed.

Improper use of Plates can lead to damage to the tissue, premature wear, destruction of the instruments and injury to the operator, patients or other persons.

It is vital for the operating surgeon to take an active role in the medical management of their patients. The surgeon should thoroughly understand all aspects of the surgical procedure and instruments including their limitations. Care in appropriate selection and proper use of surgical instruments is the responsibility of the surgeon and the surgical team. Adequate surgical training should be completed before use of this plate.

Factors which could impair the success of the operation:

Allergies to implanted materials.
Localized bone tumours.
Osteoporosis or osteomalacia.
System disease and metabolic disturbances.
Alcohol and drug abuse.
Physical activities involving excessive shocks, whereby the implant is exposed to blows and/or excessive loading.
Patients who are mentally unable to understand and comply with the doctor’s instructions.
Poor general health.

Possible Adverse Effects

The following adverse effects are the most common resulting from implantation:

Loosening of the 3.5 & 5.0 mm Locking Plate Pediatric Hip, which may result from cyclic loading of the fixation site and/or tissue reaction of the implant.
Early and late infection.
Further bone fracture resulting from unusual stress or weakened bone substance.
Temporary or chronic neural damage resulting from pressure or hematomata.
Wound hematomas and delayed wound healing.
Vascular disease including venal thrombosis, pulmonary embolism and cardiac arrest.
Heterotopic ossification.
Pain and discomfort due to presence of the Implants.
Mechanical failure of the implant, including bending, loosening or breakage.
Migration of implant resulting in injury.

Preoperative Planning for 3.5 & 5.0 mm Locking Plate Pediatric Hip

The operating planning is carried out following a thorough clinical evaluation of the patient, Also, x-rays must be taken to allow a clear indication of the bony anatomy and associated deformities. At the time of the operation, the corresponding implantation instruments in addition to a complete set of 3.5 & 5.0 mm Locking Plate Pediatric Hip must be available.

The clinician should discuss with the patient the possible risks and complications associated with the use of Implants. It is important to determine pre-operatively whether the patient is allergic to any of the implant materials. Also, the patient needs to be informed that the performance of the device cannot be guaranteed as complications can affect the life expectancy of the device.

3.5 & 5.0 mm Locking Plate Pediatric Hip Precautions

Confirm functionality of instruments and check for wear during reprocessing. Replace worn or damaged instruments prior to use.
It is recommended to use the instruments identified for this screw.
Handle devices with care and dispose worn bone cutting instruments in a sharps container.
Always irrigate and apply suction for removal of debris potentially generated during implantation or removal.

3.5 & 5.0 mm Locking Plate Pediatric Hip Warnings

3.5 & 5.0 mm Locking Plate Pediatric Hip can break during use (when subjected to excessive forces). While the surgeon must make the final decision on removal of the broken part based on associated risk in doing so, we recommend that whenever possible and practical for the individual patient, the broken part should be removed. Be aware that implants are not as strong as native bone. Implants subjected to substantial loads may fail.
Instruments, screws and cut plates may have sharp edges or moving joints that may pinch or tear user’s glove or skin.
Take care to remove all fragments that are not fixated during the surgery.
While the surgeon must make the final decision on implant removal, we recommend that whenever possible and practical for the individual patient, fixation devices should be removed once their service as an aid to healing is accomplished. Implant removal should be followed by adequate post-operative management to avoid refracture.

3.5 & 5.0 mm Locking Plate Pediatric Hip General Adverse Events

As with all major surgical procedures, risks, side effects and adverse events can occur. While many possible reactions may occur, some of the most common include: Problems resulting from anesthesia and patient positioning (e.g. nausea, vomiting, dental injuries, neurological impairments, etc.), thrombosis, embolism, infection, nerve and/or tooth root damage or injury of other critical structures including blood vessels, excessive bleeding, damage to soft tissues incl. swelling, abnormal scar formation, functional impairment of the musculoskeletal system, pain, discomfort or abnormal sensation due to the presence of the device, allergy or hypersensitivity reactions, side effects associated with hardware prominence, loosening, bending, or breakage of the device, mal-union, non-union or delayed union which may lead to breakage of the implant, reoperation.

The post Locking Plate Pediatric Hip 3.5 & 5.0mm first appeared on Archoverseas.

Locking Proximal Tibia T-Plate 4.5mm/5mm

A@rch — Wed, 26 Feb 2025 08:03:00 +0000

Ref No.	Description
PTTP-002	Locking Proximal Tibia T-Plate for Osteotomy -2H
PTTP-003	Locking Proximal Tibia T-Plate for Osteotomy -3H
PTTP-004	Locking Proximal Tibia T-Plate for Osteotomy -4H
PTTP-005	Locking Proximal Tibia T-Plate for Osteotomy -5H

The post Locking Proximal Tibia T-Plate 4.5mm/5mm first appeared on Archoverseas.

Locking Distal Femur Plate 4.5mm/5mm

A@rch — Wed, 26 Feb 2025 08:02:59 +0000

Ref No.	Description
DFPO-002	Locking Distal Femur Plate for Osteotomy -2H
DFPO-003	Locking Distal Femur Plate for Osteotomy -3H
DFPO-004	Locking Distal Femur Plate for Osteotomy -4H
DFPO-005	Locking Distal Femur Plate for Osteotomy -5H

The post Locking Distal Femur Plate 4.5mm/5mm first appeared on Archoverseas.

Locking Plate Anatomical Distal Tibia Plate For Fibula 4.5/5.0mm, Right/Left

A@rch — Wed, 26 Feb 2025 08:02:58 +0000

Ref. No. Ti	Ref. No. SS	Position	Size	Ref. No. Ti	Ref. No. SS	Position	Size
LCP678305 LCP678307 LCP678309 LCP678311 LCP678313	ATF-005R ATF-007R ATF-009R ATF-011R ATF-013R	Right Right Right Right Right	5H 7H 9H 11H 13H	LCP678405 LCP678407 LCP678409 LCP678411 LCP678413	ATF-005L ATF-007L ATF-009L ATF-011L ATF-013L	Left Left Left Left Left	5H 7H 9H 11H 13H

Ref. No. Ti

Ref. No. SS

Position

Size

Ref. No. Ti

Ref. No. SS

Position

Size

LCP678305

LCP678307

LCP678309

LCP678311

LCP678313

ATF-005R

ATF-007R

ATF-009R

ATF-011R

ATF-013R

Right

11H

13H

LCP678405

LCP678407

LCP678409

LCP678411

LCP678413

ATF-005L

ATF-007L

ATF-009L

ATF-011L

ATF-013L

Left

11H

13H

The post Locking Plate Anatomical Distal Tibia Plate For Fibula 4.5/5.0mm, Right/Left first appeared on Archoverseas.

Locking Plate Anatomical Distal Tibia 4.5/5.0mm, Right/Left

A@rch — Wed, 26 Feb 2025 08:02:58 +0000

Ref. No. Ti	Ref. No. SS	Position	Size	Ref. No. Ti	Ref. No. SS	Position	Size
LCP678705 LCP678707 LCP678709 LCP678711 LCP678713	AQ-005R AQ-007R AQ-009R AQ-011R AQ-013R	Right Right Right Right Right	5H 7H 9H 11H 13H	LCP678805 LCP678807 LCP678809 LCP678811 LCP678813	AQ-005L AQ-007L AQ-009L AQ-011L AQ-013L	Left Left Left Left Left	5H 7H 9H 11H 13H

Ref. No. Ti

Ref. No. SS

Position

Size

Ref. No. Ti

Ref. No. SS

Position

Size

LCP678705

LCP678707

LCP678709

LCP678711

LCP678713

AQ-005R

AQ-007R

AQ-009R

AQ-011R

AQ-013R

Right

11H

13H

LCP678805

LCP678807

LCP678809

LCP678811

LCP678813

AQ-005L

AQ-007L

AQ-009L

AQ-011L

AQ-013L

Left

11H

13H

The post Locking Plate Anatomical Distal Tibia 4.5/5.0mm, Right/Left first appeared on Archoverseas.

Locking Plate Tibia Distal Lateral 4.5/5.0mm, Right/Left

A@rch — Wed, 26 Feb 2025 08:02:57 +0000

Ref. No. Ti	Ref. No. SS	Position	Size	Ref. No. Ti	Ref. No. SS	Position	Size
LCP505102 LCP505104 LCP505106 LCP505108 LCP505110	TD-002R TD-004R TD-006R TD-008R TD-010R	Right Right Right Right Right	2H 4H 6H 8H 10H	LCP505202 LCP505204 LCP505206 LCP505208 LCP505210	TD-002L TD-004L TD-006L TD-008L TD-010L	Left Left Left Left Left	2H 4H 6H 8H 10H

Ref. No. Ti

Ref. No. SS

Position

Size

Ref. No. Ti

Ref. No. SS

Position

Size

LCP505102

LCP505104

LCP505106

LCP505108

LCP505110

TD-002R

TD-004R

TD-006R

TD-008R

TD-010R

Right

10H

LCP505202

LCP505204

LCP505206

LCP505208

LCP505210

TD-002L

TD-004L

TD-006L

TD-008L

TD-010L

Left

10H

4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left

Plates available holes are 2, 4, 6, 8 and 10.
Plates available for Left and Right both direction
Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
The shaft holes accept 5.0 mm locking screws in the threaded portion or 4.5 mm cortical screws or 5.0 mm Locking cancellous screws in the compression portion. Distal locking holes in plate head accept 5 mm locking screws.
4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left allow implant placement to address the individual fracture pattern.
Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
Choice of different lengths of plate eliminates the need to cut plates.
Pre-contoured plate to match anatomical shape.
Available in both Titanium and Stainless steel.
locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.
A complete Instruments Set is available for 4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left. General Instruments are available for this plate such as Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve etc.

4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left Uses

4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left is used for fixation of metaphyseal extra and intra articular fractures of the proximal Tibia.

Advantages of using Locking Plate for 5.0 mm Locking Plate Tibia Distal Lateral, Right/Left

4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left is a locking plate so it does not have to precisely contact the underlying bone in all areas. When screws are tightened, they “lock” to the threaded screw holes of the plate, stabilizing the segments without pulling the bone to the plate. Locking screws make it impossible for screw insertion to alter the reduction. Non locking plate/screw systems require a precise adaptation of the plate to the underlying bone. Without this close contact, tightening of the screws will pull the bone segments toward the plate, resulting in loss of reduction and possibly the occlusal relationship
Locking plate/screw systems do not disrupt the underlying cortical bone perfusion as much as conventional plates, which compress the plate to the cortical bone.
Screws are unlikely to loosen from the plate. Similarly, if a bone graft is screwed to the plate, a locking head screw will not loosen during the phase of graft incorporation and healing. The possible advantage to this property of a locking plate/screw system is decreased risk of inflammatory complications due to hardware loosening.
Locking plate/screw systems have been shown to provide more stable fixation than conventional non locking plate/screw systems.

Locking Screw Technology

The heads of the locking screws contain male threads while the holes in the plates contain female threads. This allows the screw head to be threaded into the NAME hole, locking the screw into the plate. This technical innovation provides the ability to create a fixed angle construct while using familiar plating techniques.

Locking Plate Technology

By using locking screws in a bone plate, a fixed-angle construct is created. In osteopenic bone or fractures with multiple fragments, secure bone
purchase with conventional screws may be compromised. Locking screws do not rely on bone/plate compression to resist patient load, but function similarly to multiple small angled blade plates. In osteopenic bone or comminuted fractures, the ability to lock screws into a fixed-angle construct is imperative.

4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left Contraindications

Acute or chronic infections, either local or systemic.
Local or systemic accurate or chronic inflammation.
Serve muscular, nervous or vascular disease endangering the affected area.
Defective bone structures, which would impede adequate anchoring of the implant.
All associated diseases which could endanger the function and success of the implant.

Warnings and Precautionary for 4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left

Before using 4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left, the surgeon and ancillary staff should study the safety information in these instructions, as well as any product-specific information in the product description, surgical procedures and/or brochures.

Improper use of Plates can lead to damage to the tissue, premature wear, destruction of the instruments and injury to the operator, patients or other persons.

Factors which could impair the success of the operation:

Allergies to implanted materials.
Localized bone tumours.
Osteoporosis or osteomalacia.
System disease and metabolic disturbances.
Alcohol and drug abuse.
Physical activities involving excessive shocks, whereby the implant is exposed to blows and/or excessive loading.
Patients who are mentally unable to understand and comply with the doctor’s instructions.
Poor general health.

Possible Adverse Effects

The following adverse effects are the most common resulting from implantation:

Loosening of the 4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left, which may result from cyclic loading of the fixation site and/or tissue reaction of the implant.
Early and late infection.
Further bone fracture resulting from unusual stress or weakened bone substance.
Temporary or chronic neural damage resulting from pressure or hematomata.
Wound hematomas and delayed wound healing.
Vascular disease including venal thrombosis, pulmonary embolism and cardiac arrest.
Heterotopic ossification.
Pain and discomfort due to presence of the Implants.
Mechanical failure of the implant, including bending, loosening or breakage.
Migration of implant resulting in injury.

Preoperative Planning for 4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left

The operating planning is carried out following a thorough clinical evaluation of the patient, Also, x-rays must be taken to allow a clear indication of the bony anatomy and associated deformities. At the time of the operation, the corresponding implantation instruments in addition to a complete set of 4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left must be available.

The clinician should discuss with the patient the possible risks and complications associated with the use of implants. It is important to determine pre-operatively whether the patient is allergic to any of the implant materials. Also, the patient needs to be informed that the performance of the device cannot be guaranteed as complications can affect the life expectancy of the device.

4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left Precautions

Confirm functionality of instruments and check for wear during reprocessing. Replace worn or damaged instruments prior to use.
It is recommended to use the instruments identified for this screw.
Handle devices with care and dispose worn bone cutting instruments in a sharps container.
Always irrigate and apply suction for removal of debris potentially generated during implantation or removal.

4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left Warnings

4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left can break during use (when subjected to excessive forces). While the surgeon must make the final decision on removal of the broken part based on associated risk in doing so, we recommend that whenever possible and practical for the individual patient, the broken part should be removed. Be aware that implants are not as strong as native bone. Implants subjected to substantial loads may fail.
Instruments, screws and cut plates may have sharp edges or moving joints that may pinch or tear user’s glove or skin.
Take care to remove all fragments that are not fixated during the surgery.
While the surgeon must make the final decision on implant removal, we recommend that whenever possible and practical for the individual patient, fixation devices should be removed once their service as an aid to healing is accomplished. Implant removal should be followed by adequate post-operative management to avoid refracture.

4.5/5.0 mm Locking Plate Tibia Distal Lateral, Right/Left General Adverse Events

The post Locking Plate Tibia Distal Lateral 4.5/5.0mm, Right/Left first appeared on Archoverseas.

Locking Plate Metaphyseal For Distal Medial Tibia 3.5/4.5/5.0mm, Right/Left

A@rch — Wed, 26 Feb 2025 08:02:57 +0000

Ref. No. Ti	Ref. No. SS	Position	Size	Ref. No. Ti	Ref. No. SS	Position	Size
LCP678504 LCP678505 LCP678506 LCP678507 LCP678508 LCP678509 LCP678510 LCP678512 LCP678514	BY-004R BY-005R BY-006R BY-007R BY-008R BY-009R BY-010R BY-012R BY-014R	Right Right Right Right Right Right Right Right Right	4H 5H 6H 7H 8H 9H 10H 12H 14H	LCP678604 LCP678605 LCP678606 LCP678607 LCP678608 LCP678609 LCP678610 LCP678612 LCP678614	BY-004L BY-005L BY-006L BY-007L BY-008L BY-009L BY-010L BY-012L BY-014L	Left Left Left Left Left Left Left Left Left	4H 5H 6H 7H 8H 9H 10H 12H 14H

Ref. No. Ti

Ref. No. SS

Position

Size

Ref. No. Ti

Ref. No. SS

Position

Size

LCP678504

LCP678505

LCP678506

LCP678507

LCP678508

LCP678509

LCP678510

LCP678512

LCP678514

BY-004R

BY-005R

BY-006R

BY-007R

BY-008R

BY-009R

BY-010R

BY-012R

BY-014R

Right

10H

12H

14H

LCP678604

LCP678605

LCP678606

LCP678607

LCP678608

LCP678609

LCP678610

LCP678612

LCP678614

BY-004L

BY-005L

BY-006L

BY-007L

BY-008L

BY-009L

BY-010L

BY-012L

BY-014L

Left

10H

12H

14H

The post Locking Plate Metaphyseal For Distal Medial Tibia 3.5/4.5/5.0mm, Right/Left first appeared on Archoverseas.

Locking Plate Metaphyseal 3.5/4.5/5.0mm

A@rch — Wed, 26 Feb 2025 08:02:57 +0000

Ref. No. Ti	Ref. No. SS	Size
LCP507003 LCP507004 LCP507005 LCP507006 LCP507007 LCP507008 LCP507009 LCP507011	AE-003 AE-004 AE-005 AE-006 AE-007 AE-008 AE-009 AE-011	3H 4H 5H 6H 7H 8H 9H 11H

Ref. No. Ti

Ref. No. SS

Size

LCP507003

LCP507004

LCP507005

LCP507006

LCP507007

LCP507008

LCP507009

LCP507011

AE-003

AE-004

AE-005

AE-006

AE-007

AE-008

AE-009

AE-011

11H

The post Locking Plate Metaphyseal 3.5/4.5/5.0mm first appeared on Archoverseas.

Locking Plate Anatomical Proximal Tibia 4.5/5.0mm, Right/Left

A@rch — Wed, 26 Feb 2025 08:02:16 +0000

Ref. No. Ti	Ref. No. SS	Position	Size	Ref. No. Ti	Ref. No. SS	Position	Size
LCP687105 LCP687107 LCP687109 LCP687111 LCP687113	AR-005R AR-007R AR-009R AR-011R AR-013R	Right Right Right Right Right	5H 7H 9H 11H 13H	LCP687205 LCP687207 LCP687209 LCP687211 LCP687213	AR-005L AR-007L AR-009L AR-011L AR-013L	Left Left Left Left Left	5H 7H 9H 11H 13H

Ref. No. Ti

Ref. No. SS

Position

Size

Ref. No. Ti

Ref. No. SS

Position

Size

LCP687105

LCP687107

LCP687109

LCP687111

LCP687113

AR-005R

AR-007R

AR-009R

AR-011R

AR-013R

Right

11H

13H

LCP687205

LCP687207

LCP687209

LCP687211

LCP687213

AR-005L

AR-007L

AR-009L

AR-011L

AR-013L

Left

11H

13H

The post Locking Plate Anatomical Proximal Tibia 4.5/5.0mm, Right/Left first appeared on Archoverseas.

Locking Plate Medial Proximal Tibia 4.5mm, Right/Left

A@rch — Wed, 26 Feb 2025 08:02:15 +0000

Ref. No. Ti	Ref. No. SS	Position	Size	Ref. No. Ti	Ref. No. SS	Position	Size
LCP681704 LCP681706 LCP681708 LCP681710 LCP681712	MPT-004R MPT-006R MPT-008R MPT-010R MPT-012R	Right Right Right Right Right	4H 6H 8H 10H 12H	LCP681804 LCP681806 LCP681808 LCP681810 LCP681812	MPT-004L MPT-006L MPT-008L MPT-010L MPT-012L	Left Left Left Left Left	4H 6H 8H 10H 12H

Ref. No. Ti

Ref. No. SS

Position

Size

Ref. No. Ti

Ref. No. SS

Position

Size

LCP681704

LCP681706

LCP681708

LCP681710

LCP681712

MPT-004R

MPT-006R

MPT-008R

MPT-010R

MPT-012R

Right

10H

12H

LCP681804

LCP681806

LCP681808

LCP681810

LCP681812

MPT-004L

MPT-006L

MPT-008L

MPT-010L

MPT-012L

Left

10H

12H

4.5 mm Locking Plate Medial Proximal Tibia, Right/Left Specification

Plates available holes are 4, 6, 8, 10 and 12.
Plates available for Left and Right both direction
Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
The shaft holes accept 5 mm locking screws in the threaded portion or 4.5 mm cortical screws or 5 mm Locking cancellous screws in the compression portion. Distal locking holes in plate head accept 5 mm locking screws or 5 mm locking cancellous screws.
4.5 mm Locking Plate Medial Proximal Tibia, Right/Left allow implant placement to address the individual fracture pattern.
Two holes for preliminary fixation with K-wires, or meniscal repair with sutures in plate head.
Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
Choice of different lengths of plate eliminates the need to cut plates.
Pre-contoured plate to match anatomical shape.
Available in both Titanium and Stainless steel.
locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.
A complete Instruments Set is available for 4.5 mm Locking Plate Medial Proximal Tibia, Right/Left. General Instruments are available for this plate such as Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve etc.

4.5 mm Locking Plate Medial Proximal Tibia, Right/Left Plate Uses

4.5 mm Locking Plate Medial Proximal Tibia, Right/Left is indicated to buttress metaphyseal fractures of the medial tibial plateau, split-type fractures of the medial tibial plateau, medial split fractures with associated depressions and split or depression fractures of the medial tibial plateau.
The plate may also be used for fixation of the proximal quarter (lateral and medial) of the tibia, as well as segmental fractures of the proximal tibia.
The Plate may also be used for fixation of non unions and malunions of the medial proximal tibia and tibia shaft, as well as opening and closing wedge tibial osteotomies.

Advantages of using locking plate for 4.5 mm Locking Plate Medial Proximal Tibia, Right/Left

4.5 mm Locking Plate Medial Proximal Tibia, Right/Left is a locking plate so it does not have to precisely contact the underlying bone in all areas. When screws are tightened, they “lock” to the threaded screw holes of the plate, stabilizing the segments without pulling the bone to the plate. Locking screws make it impossible for screw insertion to alter the reduction. Non locking plate/screw systems require a precise adaptation of the plate to the underlying bone. Without this close contact, tightening of the screws will pull the bone segments toward the plate, resulting in loss of reduction and possibly the occlusal relationship
Locking plate/screw systems do not disrupt the underlying cortical bone perfusion as much as conventional plates, which compress the plate to the cortical bone.
Screws are unlikely to loosen from the plate. Similarly, if a bone graft is screwed to the plate, a locking head screw will not loosen during the phase of graft incorporation and healing. The possible advantage to this property of a locking plate/screw system is decreased risk of inflammatory complications due to hardware loosening.
Locking plate/screw systems have been shown to provide more stable fixation than conventional non locking plate/screw systems.

Locking Screw Technology

The heads of the locking screws contain male threads while the holes in the plates contain female threads. This allows the screw head to be threaded into the 4.5 mm Locking Plate Medial Proximal Tibia, Right/Left hole, locking the screw into the plate. This technical innovation provides the ability to create a fixed angle construct while using familiar plating techniques.

Locking Plate Technology

4.5 mm Locking Plate Medial Proximal Tibia, Right/Left Contraindications

Acute or chronic infections, either local or systemic.
Local or systemic accurate or chronic inflammation.
Serve muscular, nervous or vascular disease endangering the affected area.
Defective bone structures, which would impede adequate anchoring of the implant.
All associated diseases which could endanger the function and success of the implant.

Warnings and Precautionary for 4.5 mm Locking Plate Medial Proximal Tibia, Right/Left

Before using 4.5 mm Locking Plate Medial Proximal Tibia, Right/Left, the surgeon and ancillary staff should study the safety information in these instructions, as well as any product-specific information in the product description, surgical procedures and/or brochures.

Improper use of Plates can lead to damage to the tissue, premature wear, destruction of the instruments and injury to the operator, patients or other persons.

Factors which could impair the success of the operation:

Allergies to implanted materials.
Localized bone tumours.
Osteoporosis or osteomalacia.
System disease and metabolic disturbances.
Alcohol and drug abuse.
Physical activities involving excessive shocks, whereby the implant is exposed to blows and/or excessive loading.
Patients who are mentally unable to understand and comply with the doctor’s instructions.
Poor general health.

Possible Adverse Effects

The following adverse effects are the most common resulting from implantation:

Loosening of the Medial Proximal Tibia Plate, which may result from cyclic loading of the fixation site and/or tissue reaction of the implant.
Early and late infection.
Further bone fracture resulting from unusual stress or weakened bone substance.
Temporary or chronic neural damage resulting from pressure or hematomata.
Wound hematomas and delayed wound healing.
Vascular disease including venal thrombosis, pulmonary embolism and cardiac arrest.
Heterotopic ossification.
Pain and discomfort due to presence of the Implants.
Mechanical failure of the implant, including bending, loosening or breakage.
Migration of implant resulting in injury.

Preoperative Planning for 4.5 mm Locking Plate Medial Proximal Tibia, Right/Left

The operating planning is carried out following a thorough clinical evaluation of the patient, Also, x-rays must be taken to allow a clear indication of the bony anatomy and associated deformities. At the time of the operation, the corresponding implantation instruments in addition to a complete set of 4.5 mm Locking Plate Medial Proximal Tibia, Right/Left must be available.

4.5 mm Locking Plate Medial Proximal Tibia, Right/Left Precautions

Confirm functionality of instruments and check for wear during reprocessing. Replace worn or damaged instruments prior to use.
It is recommended to use the instruments identified for this screw.
Handle devices with care and dispose worn bone cutting instruments in a sharps container.
Always irrigate and apply suction for removal of debris potentially generated during implantation or removal.

4.5 mm Locking Plate Medial Proximal Tibia, Right/Left Warnings

4.5 mm Locking Medial Proximal Tibia Plate can break during use (when subjected to excessive forces). While the surgeon must make the final decision on removal of the broken part based on associated risk in doing so, we recommend that whenever possible and practical for the individual patient, the broken part should be removed. Be aware that implants are not as strong as native bone. Implants subjected to substantial loads may fail.
Instruments, screws and cut plates may have sharp edges or moving joints that may pinch or tear user’s glove or skin.
Take care to remove all fragments that are not fixated during the surgery.
While the surgeon must make the final decision on implant removal, we recommend that whenever possible and practical for the individual patient, fixation devices should be removed once their service as an aid to healing is accomplished. Implant removal should be followed by adequate post-operative management to avoid refracture.

4.5 mm Locking Plate Medial Proximal Tibia, Right/Left General Adverse Events

The post Locking Plate Medial Proximal Tibia 4.5mm, Right/Left first appeared on Archoverseas.